Meitrack MVT340 is a vehicle GPS tracker for using in personal cars to control the safety and status of the vehicles. It has the external GPS and GSM antennas and a full set of the popular tracking features.
Location and tracking
MVT340 model is embedded with GPS chip. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).
The tracking mode is flexible and can be configured depending on distance, time and angle. The default parameters set by the system are 100m, 60 sec, 30 degrees. When there is no movement, tracker sends data every 180 seconds.
- 2 inputs (1 negative input and 1 positive input)
- 1 analog detection input
- 1 output
- 1 USB port
With Quad-band GSM 2G module Meitrack MVT340 can be operated all over the world.
Meitrack MVT340 uses voltage range 11-36V, which makes possible to install it both on cars and trucks. Device also features a built-in rechargeable backup battery. When fully charged it ensures about 3 hours of device operation (in normal conditions).
Local and remote management
Meitrack devices support management via GPRS. Also, there is a wide list of SMS commands, on which device always replies back. In particular, Server address and port, APN settings can be applied remotely with SMS.
MVT340 has two status LEDs:
- Status LED: indicates GSM/GPRS mode
- Navigate LED: indicates GPS reception
|EU platform||tracker.navixy.com (188.8.131.52)|
|US platform||tracker.us.navixy.com (184.108.40.206)|
|Size||105x65x26 mm (4.13x2.56x1.02 in)|
|External antenna (GNSS)||Yes|
|External antenna (Connection)||Yes|
|Network signal level||Yes|
|Cellular network type||GSM Quad Band|
|GNSS signal level||Yes|
|Forced GNSS location update over SMS||Yes|
|Remote outputs control||Yes|
|Battery capacity||850 mAh|
|Number of outputs||1|