Meitrack MVT380 is a vehicle GPS tracker for using in personal cars to control the safety and status of the vehicles. It is positioned by the manufacturer as an anti-thief terminal.
It has the external GPS and GSM antennas and a full set of the popular tracking features.
The device has a microphone and a speaker for the voice communication.
Location and tracking
MVT380 model is embedded with GPS chip. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).
The tracking mode is flexible and can be configured depending on distance, time and angle. The default parameters set by the system are 100m, 60 sec, 30 degrees. When there is no movement, tracker sends data every 180 seconds.
- 5 digital inputs (3 negative inputs and 2 positive inputs)
- 2 analog detection inputs
- 5 outputs
- 1 loudspeaker or microphone port
- 1 USB port
With Quad-band GSM 2G module Meitrack MVT380 can be operated all over the world.
Meitrack MVT380 uses voltage range 11-36V, which makes possible to install it both on cars and trucks. Device also features a built-in rechargeable backup battery. When fully charged it ensures about 3 hours of device operation (in normal conditions).
Local and remote management
Meitrack devices support management via GPRS. Also, there is a wide list of SMS commands, on which device always replies back. In particular, Server address and port, APN settings can be applied remotely with SMS.
MVT380 has two status LEDs:
- Status LED: indicates GSM/GPRS mode
- Navigate LED: indicates GPS reception
|EU platform||tracker.navixy.com (18.104.22.168)|
|US platform||tracker.us.navixy.com (22.214.171.124)|
|Size||105x65x26 mm (4.13x2.56x1.02 in)|
|External antenna (GNSS)||Yes|
|External antenna (Connection)||Yes|
|Network signal level||Yes|
|Cellular network type||GSM Quad Band|
|GNSS signal level||Yes|
|Forced GNSS location update over SMS||Yes|
|Remote outputs control||Yes|
|Battery capacity||850 mAh|
|Number of outputs||5|