menu

ATrack AX5

ATrack AX5 is the basis for the ultimate solution for fleet managers in need of monitoring location, speed, and parameters available on the OBD port of vehicles. In addition, AX5 can be installed in matter of seconds which substantially reduces the high cost of installation.

Show more

Location and tracking

ATrack AX5 is embedded with GPS chip. It also supports Assisted GPS (A-GPS) technology. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

The tracking mode is flexible configured: by moving every 100m, and every 60 sec, and on turning on 30 degrees by default.

Mobile networks

With Quad-band GSM module ATrack AX5 can be operated all over the world.

Features

ATrack AX5 has following features:

  • CANBus Supported. (Optional – OBDII model)
  • Simple Plug & Play installation
  • More accurate calculated odometer value
  • Fuel consumption data
  • Able to show engine/ignition status
  • GSM jamming detect and report
  • Impact/Crash detection (Up to 16G)
  • FOTA (Firmware updating via GPRS from FTP server)
  • Configurable real time tracking and logging interval by time, distance, ignition status, vehicle speed or heading changes
  • GSM/GPRS Roaming preference setting
  • GPS reception timeout detection
  • Acceleration Detection (Harsh breaking and acceleration measuring)
  • GPS/VSS odometer
  • Ignition and engine on/off detection
  • Speeding, idle report, vehicle towing alert
  • User defined Geofence zones (Circular and Rectangular)
  • User defined reports
  • Schedule control for all reports
  • Configurable power management setting

Power supply

External power supply might be 8-40V, which makes possible to use ATrack AX5 with all car models.

With an integrated J1962 connector, an extremely compact design powered through the OBDII port, and low power consumption, ATrack AX5 can be installed in matter of seconds which substantially reduces the high cost of installation.

Local and remote management

ATrack AX5 device is capable of firmware update and configuration over-the-air.

In case you are not able to configure device over the air, manual management over SMS-commands and configuration software is also available.

Server Integration

EU platformtracker.navixy.com (52.57.1.136)
US platformtracker.us.navixy.com (13.52.37.2)
Server port47712

General information

PurposeVehicle
InstallationDIY
Special form factorOBDII Dongle

Housing

Weight50 g (1.76 oz.)
Size50x46x25 mm (1.97x1.81x0.98 in)

GNSS Location

Internal antenna (GNSS)Yes
GPSYes
Assisted GPSYes

Connectivity

Cellular network typeGSM Quad Band
Internal antenna (Connection)Yes
Cellular network generation2G

Hardware features

AccelerometerYes

Tracking features

Tracking modesInterval, Continuous
Location by Cell IDYes
Supported
Smart power consumptionYes
Supported
OdometerYes
Supported
ECO drivingYes
Supported

Events monitoring

External power cut offYes
Supported
DetachYes
Supported

Self monitoring

Network signal levelYes
Supported
GNSS signal levelYes
Supported
External power source voltageYes
Supported

CAN/OBDII reading

CAN/OBDII reader typeYes
Supported
CAN/OBDII parametersFuel level, fuel consumption, engine RPM, throttle position, speed, coolant temperature and other

Remote management

Server connection setup over SMSYes
Supported
Remote device configurationYes (over GPRS), Yes
Supported
Firmware update OTAYes
Forced GNSS location update over SMSYes
Supported

Certification

CEYes
Activate a device on the platform Try it now
Haven’t found your device? We can add it Integrate
Tracking 3.0 NEW
Open
Tracking 3.0 NEW
Thousands of objects.
Intuitive UX.
Powerful design.
Learn more >
Open

This website uses cookies.
See our Privacy Policy to learn more.