RedView VT680 is designed for high-end application, such as tracking heavy transport, taxis, for use as a black box application, and many more. It has a variety of inputs and outputs, and support CAN bus data reading.
Location and tracking
The device support only continuous GPS mode. It doesn’t support LBS location, so it’s recommended for use in the ares with strong GPS singal.
Standard quad-band 850/900/1800/1900Mhz. The device doesn’t support 3G network. The device also support Wi-fi and Bluetooth networks.
The device have internal battery, which can be used when external power supply is not available.
Inputs and outputs
The device has 4 digital inputs, 4 digital outputs, 2 analog inputs, and 3 serial RS232 port. With CAN bus bridge, the device can read vehicle status data.
The device have an emergency button which can be used to send the SOS signal to the server.
GSM jamming detection
The device feature a GSM antenna tamper or jamming detection, and can send alarms on detection of such events.
- Fuel sensor
- Temperature sensor
- RFID reader
- 2 ways voice kits
- CAN/OBD bridge
- SD card
- Mobile data terminal
- Barcode scanner
- RS232 bluetooth adapter
|EU platform||tracker.navixy.com (184.108.40.206)|
|US platform||tracker.us.navixy.com (220.127.116.11)|
|Weight||670 g (23.63 oz.)|
|Size||113x78x35 mm (4.45x3.07x1.38 in)|
|Fuel level sensor reading||Yes|
|Driver ID reading||Yes|
|External temperature sensor reading||Yes|
|External power cut off||Yes|
|GNSS signal level||Yes|
|CAN/OBDII reader type||Yes|
|Server connection setup over SMS||Yes|
|Remote device configuration||Yes (over GPRS)|