Neomatica ADM333 BLE
ADM333 BLE is a compact autonomous vehicle tracker that can work with a wide range of wireless sensors.
Show more
Location and tracking
- GPS, GLONASS Support
- Continuous tracking mode
Mobile networks
- 2G Network
Power supply
- 250mA Li-Po build-in battery
- Supply voltage: +8,5..+40V
Inputs and outputs
- 4 Discrete inputs
- 2 Analog inputs
- RS 485
- 1 Wire
- 1 Digital output
Server Integration
| EU platform | tracker.navixy.com (52.57.1.136) | |
| US platform | tracker.us.navixy.com (13.52.37.2) | |
| Server port | 47758 |
General information
| Purpose | Vehicle | |
| Installation | Professional |
Housing
| Weight | 39 g (1.38 oz.) | |
| Size | 55x49x20 mm (2.17x1.93x0.79 in) |
GNSS Location
| Internal antenna (GNSS) | Yes | |
| GPS | Yes | |
| GLONASS | Yes |
Connectivity
| Cellular network type | GSM Quad Band | |
| Internal antenna (Connection) | Yes | |
| Cellular network generation | 2G |
Interfaces
| Number of outputs | 1 | |
| Number of inputs (all types) | 4 | |
| Discrete inputs | Yes | Supported |
| Analog inputs | Yes | Supported |
| Impulse inputs | Yes | Supported |
| RS485 interface | Yes | |
| 1-Wire interface | Yes |
Hardware extras
| Fuel level sensor reading | Yes | Supported |
| Driver ID reading | Yes | Supported |
| External temperature sensor reading | Yes |
Tracking features
| Tracking modes | Continuous | |
| Odometer | Yes | Supported |
Events monitoring
| Battery low | Yes | Supported |
| External power cut off | Yes | Supported |
Self monitoring
| Network signal level | Yes | Supported |
| GNSS signal level | Yes | Supported |
| External power source voltage | Yes | Supported |
| Internal battery level | Yes | Supported |
CAN/OBDII reading
| CAN/OBDII reader type | External | Supported |
Remote management
| Server connection setup over SMS | Yes | Supported |
| Remote device configuration | Yes (over GPRS) | Supported |
| Remote outputs control | Yes (over GPRS) | Supported |
| Forced GNSS location update over SMS | Yes | On request |
Activate a device on the platform Try it now
Haven’t found your device? We can add it Integrate