Modern network with stable reliability, is what brings the T333 GPS vehicle tracker. The T333 is Meitrack’s first GPS tracker that can run on 3G network for faster and more stable connections wherever 3G is available. The T333 GPS vehicle tracker has a built in function that will detect if the 3G connection is available and if for some reason its not, then it can switch to the 2G until the signal is back up. This tracker delivers with the many standard features that make all Meitrack GPS trackers stand above the competition which includes the 3G antenna.
Location and tracking
T333 model is embedded with GPS chip. It supports Assisted GPS (A-GPS) technology. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).
The tracking mode is flexible and can be configured depending on distance, time and angle. The default parameters set by the system are 100m, 60 sec, 30 degrees. When there is no movement, tracker sends data every 180 seconds.
- 3 Digital Inputs (1 positive and 2 negative),
- 2 Analog Inputs,
- 3 Outputs,
- 1 RS232 Interface (for connecting with handset / RFID reader, camera, LCD display, LED display),
- 1 USB port,
- 1 digital temperature sensor port.
The manufacturer offers different accesories, such as:
- LCD Display
- Analog fuel sensor
- LED Display
- RFID Reader
- Digital fuel sensor
With Quad-band GSM 2G module T333 can be operated all over the world.
Also, it supports a faster and more stable 3G connection.
T333 uses voltage range 11-36V, which makes possible to install it both on cars and trucks. Device also features a built-in rechargeable backup battery. When fully charged it ensures about 3 hours of device operation (in normal conditions).
Local and remote management
Meitrack devices support management via GPRS. Also, there is a wide list of SMS commands, on which device always replies back. In particular, Server address and port, APN settings can be applied remotely with SMS.
T333 has two status LEDs:
- Status LED: indicates GSM/GPRS mode
- Navigate LED: indicates GPS reception
|EU platform||tracker.navixy.com (22.214.171.124)|
|US platform||tracker.us.navixy.com (126.96.36.199)|
|Weight||190 g (6.7 oz.)|
|Size||105x65x26 mm (4.13x2.56x1.02 in)|
|External antenna (GNSS)||Yes|
|Cellular network type||GSM Quad Band|
|External antenna (Connection)||Yes|
|Cellular network generation||3G, 2G|
|Number of RS232 interfaces||1|
|Number of outputs||3|
|Number of inputs (all types)||5|
|Battery capacity||850 mAh|
|Internal temperature sensor||Yes|
|Fuel level sensor reading||Yes|
|Driver ID reading||Yes|
|Engine block special control||Yes|
|External temperature sensor reading||Yes|
|Location by Cell ID||Yes|
|Smart power consumption||Yes|
|Antenna cut off||Yes|
|Device switched on/off||Yes|
|SIM card slot open||Yes|
|Network signal level||Yes|
|GNSS signal level||Yes|
|GNSS satellites fixed||Yes|
|External power source voltage||Yes|
|Internal battery level||Yes|
|Server connection setup over SMS||Yes|
|Remote device configuration||Yes (over GPRS), Yes|
|Remote outputs control||Yes (over GPRS), Yes|
|Forced GNSS location update over SMS||Yes|