menu

Ruptela FM-Pro4

Ruptela FM-Pro4 is the fourth generation advanced, low power consumption, but powerful tracking device. It acquires its position by GPS/GLONASS signal and transfers data to server via GPRS cellular network.

Mostrar más

FM-Pro4 new features compared to PRO3:

  • Lower power consumption
  • More powerful 1-wire interface
  • USB power supply for configuration
  • 2 x RS232 and 1 x RS485 ports work at the same time
  • 2 SIM card slots (on demand)
  • Gyroscope (on demand)

Package contents

Ruptela FM-Pro4 device is supplied in cardboard package. GPS/GLONASS antenna and IO cables are disconnected from device. Package contents:

  • FM-Pro4 device
  • 12 PINs and 14 PINs cables
  • GPS/GLONASS all-in-one antenna

Power supply

Ruptela FM-PRO4 model supports 10-32V power supply which makes it possible to install the device both on cars and vans.

Accessories

There are several peripheral accessories that can be mounted with FM-Pro4 device. With peripherals you can get even more features and extend application. All available peripherals can be purchased from Ruptela.

Ruptela FM-Pro4 device supports RS232, RS485, 1-wire and CAN interfaces. List of available peripherals devices that can be used with FM-Pro4:

Available on 1-Wire:

  • 4 × Temperature sensors DS18B20/DS18S20 (10 mA @ 5 V)
  • 1 × iButton DS1990 (20 mA @ 5 V)

Available on DOUTs:

  • 1 × Buzzer/LED
  • 1 × ECO Driving panel (Power supply from 1-Wire. 40 mA @ 5 V)
  • 1 × Ignition lock

Available on AINs:

  • 2 × Analogue fuel sensors

Available on RS232 ports A and/or B:

  • 2 x LLS digital fuel sensors
  • 1 x Garmin (Send and receive SMS, routes to/from navigation system. Only on port B)
  • 2 x RFID readers
  • 1 x CANlog adapter (to get CAN data from CANlog adapter connected to vehicle)
  • Spreader
  • Alcohol sensor

Available on RS485 port C:

  • Up to 10 LLS fuel sensors
  • 1 x J1708 interface

Available on CAN interface: Vehicle CANbus (FMS) information reading

LED Indication

Ruptela FM-Pro4 device has two LEDs:

  • GPS LED
  • GSM LED

Certification

Ruptela FM-Pro4 devices have passed quality tests and comply with following certifications:

  • E-Mark
  • CE ready
  • RoHS

Integración de Servidor

Servidor de la EUtracker.navixy.com (52.57.1.136)
Servidor de la UStracker.us.navixy.com (13.52.37.2)
Puerto de servidor47747
Integrado25/06/2015

Información general

PurposeVehículo, Dispositivo
InstalaciónProfesional

Alojamiento

Peso300 g (10.58 oz.)
Tamaño111x75x25 mm (4.37x2.95x0.98 in)

Localización GNSS

GPS

Conectividad

Tipo de la red del celularGSM 900/1800
Generación de red celular2G

Interfaces

Número de Interfaces RSC2322
Número de salidas3
Número de entradas (todos tipos)2
Entradas digitales
Soportado
Entrada análoga
Soportado
Interfaz RS232
Interfaz RS485
Interfaz 1-Wire
Salidas

Características de hardware

Capacidad de batería800 mAh
Batería integrada

Hardware extras

Lectura del identificador del conductor
Soportado

Monitoreo de eventos

Cambio de entrada
Soportado

Automonitoreo

Nivel de señal
Soportado
Nivel de señal GNSS
Soportado
Satélites GNSS fijados
Soportado
Voltaje de alimentación externa
Soportado
Nivel de batería interna
Soportado

Leyendo CAN/OBDII

Tipo de lector CAN/OBDII
Soportado
Parámetros CAN/OBDIIFuel level, fuel consumption, engine RPM, throttle position and other

Administración remota

La conexión con servidor por SMS
Soportado
Configuración remota de dispositivoSí (por GPRS), Sí
Control remoto de las salidasSí (por GPRS), Sí

Certificacón

CE
Active un dispositivo en la plataforma Probar
¿No ha encontrado su dispositivo? Podemos añadirlo Integrar
Rastreo 3.0 NEW
Open
Rastreo 3.0 NEW
Miles de objetos.
Intuitiva UX.
Poderoso diseño.
Saber más >
Open

Este sitio usa cookies.
Revise nuestra Política de Privacidad para saber más.

Do you want to switch to English version?

Yes No