menu

Ruptela FM-Pro4

Ruptela FM-Pro4 is the fourth generation advanced, low power consumption, but powerful tracking device. It acquires its position by GPS/GLONASS signal and transfers data to server via GPRS cellular network.

Show more

FM-Pro4 new features compared to PRO3:

  • Lower power consumption
  • More powerful 1-wire interface
  • USB power supply for configuration
  • 2 x RS232 and 1 x RS485 ports work at the same time
  • 2 SIM card slots (on demand)
  • Gyroscope (on demand)

Package contents

Ruptela FM-Pro4 device is supplied in cardboard package. GPS/GLONASS antenna and IO cables are disconnected from device. Package contents:

  • FM-Pro4 device
  • 12 PINs and 14 PINs cables
  • GPS/GLONASS all-in-one antenna

Power supply

Ruptela FM-PRO4 model supports 10-32V power supply which makes it possible to install the device both on cars and vans.

Accessories

There are several peripheral accessories that can be mounted with FM-Pro4 device. With peripherals you can get even more features and extend application. All available peripherals can be purchased from Ruptela.

Ruptela FM-Pro4 device supports RS232, RS485, 1-wire and CAN interfaces. List of available peripherals devices that can be used with FM-Pro4:

Available on 1-Wire:

  • 4 × Temperature sensors DS18B20/DS18S20 (10 mA @ 5 V)
  • 1 × iButton DS1990 (20 mA @ 5 V)

Available on DOUTs:

  • 1 × Buzzer/LED
  • 1 × ECO Driving panel (Power supply from 1-Wire. 40 mA @ 5 V)
  • 1 × Ignition lock

Available on AINs:

  • 2 × Analogue fuel sensors

Available on RS232 ports A and/or B:

  • 2 x LLS digital fuel sensors
  • 1 x Garmin (Send and receive SMS, routes to/from navigation system. Only on port B)
  • 2 x RFID readers
  • 1 x CANlog adapter (to get CAN data from CANlog adapter connected to vehicle)
  • Spreader
  • Alcohol sensor

Available on RS485 port C:

  • Up to 10 LLS fuel sensors
  • 1 x J1708 interface

Available on CAN interface: Vehicle CANbus (FMS) information reading

LED Indication

Ruptela FM-Pro4 device has two LEDs:

  • GPS LED
  • GSM LED

Certification

Ruptela FM-Pro4 devices have passed quality tests and comply with following certifications:

  • E-Mark
  • CE ready
  • RoHS

Server Integration

EU platformtracker.navixy.com (52.57.1.136)
US platformtracker.us.navixy.com (13.52.37.2)
Server port47747
Integrated on25/06/2015

General information

PurposeVehicle, Asset
InstallationProfessional

Housing

Weight300 g (10.58 oz.)
Size111x75x25 mm (4.37x2.95x0.98 in)

GNSS Location

GPSYes

Connectivity

Cellular network typeGSM 900/1800
Cellular network generation2G

Interfaces

Number of RS232 interfaces2
Number of outputs3
Number of inputs (all types)2
Discrete inputsYes
Supported
Analog inputsYes
Supported
RS232 interfaceYes
RS485 interfaceYes
1-Wire interfaceYes
OutputsYes

Hardware features

Battery capacity800 mAh
Built-in batteryYes

Hardware extras

Driver ID readingYes
Supported

Events monitoring

Input changeYes
Supported

Self monitoring

Network signal levelYes
Supported
GNSS signal levelYes
Supported
GNSS satellites fixedYes
Supported
External power source voltageYes
Supported
Internal battery levelYes
Supported

CAN/OBDII reading

CAN/OBDII reader typeYes
Supported
CAN/OBDII parametersFuel level, fuel consumption, engine RPM, throttle position and other

Remote management

Server connection setup over SMSYes
Supported
Remote device configurationYes (over GPRS), Yes
Remote outputs controlYes (over GPRS), Yes

Certification

CEYes
Activate a device on the platform Try it now
Haven’t found your device? We can add it Integrate
Tracking 3.0 NEW
Open
Tracking 3.0 NEW
Thousands of objects.
Intuitive UX.
Powerful design.
Learn more >
Open

This website uses cookies.
See our Privacy Policy to learn more.