Cellocator Cello-CANiQ

Location and tracking

• GPS
• Continious tracking mode

Mobile networks

• GSM 850/900/1800/1900 MHz
• UMTS 900/2100 MHz

Power supply

• Build-in battery (Li-Ion Polymer, 1000 mAh)
• External power supply (9… 32 V DC)

Inputs and outputs

• 1 internally pulled down input dedicated for ignition switch
• 1 internally pulled up Discrete Dry input with assignable functionality and configurable threshold for logical high and low states.
• 2 configurable inputs capable of serving as:
  Frequency counters – configurable resolution; Up to 5kHz input signal; signal level (3V < Vin ≤ 30V), accuracy ±2%
  Analog inputs with variable resolution – 8bit, adapted to 0-2.5V signal, resolution 20mV, accuracy ±20mV; 8bits, adapted to 0-30V
• 4 general purpose open drain outputs (250mA max) with assignable functionality.

Other features

• Local management
• Accessories
• DTC (Diagnostic Trouble Codes) support
• Above 2000 complementary vehicle libraries (reverse engineering)
• Classic Bluetooth & BLE support (external adaptor).
• Configurable real-time and on-board powerful logic engine over vehicles parameters
• Mobileye support via CANBUS interface
• Simultaneous connectivity K-line and CANBUS
• PointerCept ready – a solution combining Hybrid RF variants in addition to cellular communication.