menu

Cellocator Cello-CANiQ

Cellocator Cello-CANiQ is a fleet management solution, utilizing a smart algorithm to combine data from various vehicle environment interfaces. These interfaces include standard CANBUS and OBD, driver identification, serial communication with third party devices, discrete, analog and frequency measurement ports, voice channel, and others.

Mostrar más

Location and tracking

  • GPS
  • Continious tracking mode

Mobile networks

  • GSM 850/900/1800/1900 MHz
  • UMTS 900/2100 MHz

Power supply

  • Build-in battery (Li-Ion Polymer, 1000 mAh)
  • External power supply (9… 32 V DC)

Inputs and outputs

  • 1 internally pulled down input dedicated for ignition switch
  • 1 internally pulled up Discrete Dry input with assignable functionality and configurable threshold for logical high and low states.
  • 2 configurable inputs capable of serving as:
    Frequency counters – configurable resolution; Up to 5kHz input signal; signal level (3V < Vin ≤ 30V), accuracy ±2%
    Analog inputs with variable resolution – 8bit, adapted to 0-2.5V signal, resolution 20mV, accuracy ±20mV; 8bits, adapted to 0-30V
  • 4 general purpose open drain outputs (250mA max) with assignable functionality.

Other features

  • Local management
  • Accessories
  • DTC (Diagnostic Trouble Codes) support
  • Above 2000 complementary vehicle libraries (reverse engineering)
  • Classic Bluetooth & BLE support (external adaptor).
  • Configurable real-time and on-board powerful logic engine over vehicles parameters
  • Mobileye support via CANBUS interface
  • Simultaneous connectivity K-line and CANBUS
  • PointerCept ready – a solution combining Hybrid RF variants in addition to cellular communication.

Conexión del servidor

Servidor de la UEtracker.navixy.com (52.57.1.136)
Servidor de USAtracker.us.navixy.com (13.52.37.2)
Puerto de servidor47718

Información general

FinalidadVehículo

Conectividad

Estado de roaming
Nivel de señal
ID del operador

Información de ubicación

Nivel de señal GNSS
LBS
Localización forzada por GNSS preferente a GPRS

Características

Control remoto de las salidas
Odómetro
Lectura del identificador del conductor

Interfaces

Entradas digitales8
Número de salidas8
Sensor analógico
Active un dispositivo en la plataforma Probar
¿No ha encontrado su dispositivo? Podemos añadirlo Integrar
Video telemática ¡NUEVO!
Open
Video telemática ¡NUEVO!
Verifique incidentes
Determine responsabilidades
Entrene conductores
Leer más >
Open

Este sitio usa cookies.
Revise nuestra Política de Privacidad para saber más.

Do you want to switch to English version?

Yes No