Xirgo XT2460G OBDII

Xirgo XT2460G is the most versatile and economical diagnostic & monitoring device available today for communicating vital vehicle information to owners via ubiquitous UMTS networks. With an integrated GPS engine, cellular and GPS antennas, and integrated OBDII interface, the XT2460G is the ultimate solution for fleet managers in need of monitoring location, speed, and many other codes available on the OBD port of vehicles.

Show more

Location and tracking

Xirgo XT2460G is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It either doesn’t support Assisted GPS (A-GPS) technology.

With a highly sensitive GPS engine along with an integrated GPS antenna and multiple OBDII protocols supported, Xirgo XT2460 3G can be installed in majority of vehicles that ware manufacture from 1996 and up.

Mobile networks

With Six-band GSM 3G module Xirgo XT2460G can be operated all over the world both in 2G and 3G networks.


In addition to support for open OBD II standard parameters the XT2460G has additional functionality to support OEM proprietary parameters. This gives our customers unrivaled versatility for providing additional information from the vehicle BUS such as true odometer and seat belt status.

With an integrated J1962 connector, an extremely compact design powered through the OBD port, and low power consumption, the XT2460G can be installed in a matter of seconds which substantially reduces installation cost.

Xirgo XT2460G has following features:

  • 3G Network (UMTS/HSPA)
  • 3G Bands 850/1900 MHz
  • LED status indicators for GPS lock, GSM registration and OBD II communication
  • Over-the-air firmware upgrade
  • Supports SMS, UDP, FTP
  • Supports all J1962 OBD Pins
  • 3-axis Accelerometer and Motion Detector
  • Integrated GPS receiver and antenna for tracking applications
  • Audible Feedback (Buzzer)
  • Optional 250 mAh backup battery

Power supply

External power supply might be 6-24V, which makes possible to use Xirgo XT2460G with all car models.

Local and remote management

With its highly mature firmware, Xirgo XT2460 3G supports SMS, UDP, FTP and is capable of firmware update and configuration over-the-air.

In case you are not able to configure device over the air, manual management over SMS-commands and configuration software is also available.

Server Integration

EU (
US (
Server port47716

General information

InstallationNot required
Special form factorOBDII Dongle


Peso55 g (1.94 oz.)
Tamanho45.7x38.1x25.4 mm (1.8x1.5x1 in)

GNSS Location

Antena interna (GNSS)Yes


Tipo de rede celularGSM Six Band
Antena interna (Conexão)Yes
Geração de rede celular3G, 2G


ACC/Ignition inputYes

Hardware features

Capacidade da bateria250 mAh
Bateria integradaOptional

Tracking features

Tracking modesContinuous
ECO drivingYes

Events monitoring

External power cut offYes

Self monitoring

Network signal levelYes
On request
GNSS signal levelYes
External power source voltageYes
Internal battery levelYes
On request

CAN/OBDII reading

CAN/OBDII parametersFuel level, fuel consumption, engine RPM, throttle position, speed, engine load, coolant temperature, DTC error codes and other
Check engine lightYes
DTC codes readingYes

Remote management

Remote device configurationYes (over SMS)
Firmware update OTAYes
Forced GNSS location update over SMSYes
On request


Activate a device on the platform Try it now
Haven’t found your device? We can add it Integrate

Este website utiliza cookies.
Leia nossa Política de Privacidade para saber mais.

Do you want to switch to English version?

Yes No