The SkyPatrol TT8750 is an innovative certified dual & quad-band tracker that is optimized for today’s increasing demand for vehicle recovery, fuel efficient fleet operations, driver and vehicle profiling and interactive communications. Providing complete GSM/GPRS communications TT8750 helps you track and monitor vehicles from the family car to the largest fleet of commercial vehicles.
Location and tracking
SkyPatrol TT8750 is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It either doesn’t support Assisted GPS (A-GPS) technology.
With Quad-band GSM module SkyPatrol TT8750 can be operated all over the world.
External power supply might be 7-40V, which makes possible to install SkyPatrol TT8750 both on cars and vans.
Device also features a built-in rechargeable 230 mAh backup battery. When fully charged it ensures about an hour of device operation (in normal conditions).
The battery features:
- Overload protection
- Temperature sensing (will disconnect charging if out of temp range, 0-45 degrees C)
- Battery identification (prevents user from trying to power the unit with an unauthorized battery, or change an unauthorized battery)
Local and remote management
SkyPatrol TT8750 device can be configured and managed over-the-air.
In case you are not able to configure device over the air, manual management over SMS-commands and configuration software is also available.
SkyPatrol TT8750 offers following features:
- Support for Garmin’s Fleet Management Interface (FMI) (optional)
- Enable virtually any telematics application with included software suite
- Flexible customization through built-in programmable rules engine, a network router & control automation capabilities
- Wireless data and voice port available on TT8750 for user email and voice communication
- Geo-fencing & GPIO’s
- Auto-registration on power up
- Internal battery back-up on the TT8750 allows for continued operation when main input power is removed
- Integrated SMS for commands & messages
SkyPatrol TT8750 has three LEDs on its front panel:
- GPS PWR – indicates power to the GPS module
- User LED 1 – By default this LED shows GSM/GPRS status. It can be configured to display registration, or other user functions.
- User LED 2 – By default this LED shows GPS fix status. It can be configured to display registration, GPS fix status, or other functions.
|EU platform||tracker.navixy.com (188.8.131.52)|
|US platform||tracker.us.navixy.com (184.108.40.206)|
|Weight||130 g (4.59 oz.)|
|Size||65x61x26 mm (2.56x2.4x1.02 in)|
|External antenna (GNSS)||Yes|
|Cellular network type||GSM Quad Band|
|External antenna (Connection)||Yes|
|Cellular network generation||2G|
|Number of outputs||7|
|Number of inputs (all types)||8|
|Battery capacity||230 mAh|
|Internal temperature sensor||Yes|
|Fuel level sensor reading||No|
|Driver ID reading||No|
|Fuel temperature sensor reading||No|
|Location by Cell ID||Yes|
|Smart power consumption||Yes|
|Network signal level||Yes|
|GNSS signal level||Yes|
|Server connection setup over SMS||Yes|
|Remote device configuration||Yes (over GPRS), Yes|
|Remote outputs control||Yes (over GPRS), Yes|
|Forced GNSS location update over SMS||Yes|