Albatross S8.5

Features:

• CAN module – reads data from the CAN bus (J1939, J1708, J1587, FMS) – over 550 vehicles supported! (Full CAN module description on a separate data sheet)
• GSM/GPRS Module: 850/900/1800/1900 MHz SIMCOM/QUECTEL with JAMMING function
• GPS Quectel L10/L70 receiver with ANTY-JAMMING function
• Advanced filters of analog inputs (analog floats; fuel probes) with data support after the loss of the main power supply
• External active GPS antenna (3 meter / SMA connector)
• External quad band antenna (3 meter / SMA-RP connector
• Internal sustaining clock RTC (Real Time Clock)
• External RS-232-TTL (optional; RS-232, RS-485)
• Internal battery 550 mAh (optional); Charging control
• ABS casing: 89x63x30 [mm]
• Memory archive – minimum of 24.000 events (up to 48.000)
• Signaling operation diodes of GSM and GPS
• Full support of 1-Wire DALLAS protocol (6 thermometers, DALLAS / RFID identification)
• Alarm, which informs that the GPS antenna is dissconnected – real-time monitoring
• Operating a dedicated Albatross Wi-Fi module which enables a communication between GPRS-S8 terminal and a communicator / tablet using Wi-Fi networks
• Full support for Mobileye technology
• Full solutions support MIDAS MOVON
• Authoring solution of protecting inputs of the device (power; ignition switch; analog inputs) – these inputs are damage resistant (e.g surge in vehicle installation)
• Incremental firmware – backward compatible always contains all the device functions , which ensures ease of managing software versions; Files to update are delivered directly to a partner in order to further updates by using the FTP server
• Optional support of 3D sensor in order to detect accident; tows; car cullets
• ImmoDALLAS – an additional security for customers vehicle. The device activates the output in case of detecting the absence of authorization (DALLAS, RFID); The device allows you to save up to 256 identification numbers of drivers!
• Ignition signal detection using a dedicated analog input, the main power supply voltage or from CAN bus
• Ability to implement a dedicated logic functions; commands and a help of handling modules on partners demand in case of further cooperation

Applications:

• Vehicle Real-time Tracking
• Vehicle Data Warehouse
• Vehicle Security / Rescue / Anti-hijack
• Mobile Asset Tracking
• Fleet Management
• Location Based Service

Inputs / Outputs

• 2 reacting to mass inputs
• 2 open collector outputs
• 3 analog inputs (for ignition voltage measurement; fuel probes)
• 1-Wire Input (identification of drivers; temperature measurement; DALLAS, RFID)
• RS-232-TTL communication port (default)
• RS-232 communication port (optional)
• RS-485 communication port (optional)
• Counting input
• CAN J1939 / J1708 / J1587 / FMS / OBDII / TACHO