Albatross S8.5

More from Albatross

Albatross s6

Albatross s6

Albatross S8.5

Albatross S8.5

Albatross S8.5 Terminal allows you to connect modules to support advanced transport fleet managing projects; full logistic data reading from the bus CAN/FMS/J1708/OBDII; remote driver cards DDD downloads and mas memory; read drivers status from the bus D8; communication and transport management on a connected GARMIN (FMI) navigation.

Show more


  • CAN module – reads data from the CAN bus (J1939, J1708, J1587, FMS) – over 550 vehicles supported! (Full CAN module description on a separate data sheet)
  • GSM/GPRS Module: 850/900/1800/1900 MHz SIMCOM/QUECTEL with JAMMING function
  • GPS Quectel L10/L70 receiver with ANTY-JAMMING function
  • Advanced filters of analog inputs (analog floats; fuel probes) with data support after the loss of the main power supply
  • External active GPS antenna (3 meter / SMA connector)
  • External quad band antenna (3 meter / SMA-RP connector
  • Internal sustaining clock RTC (Real Time Clock)
  • External RS-232-TTL (optional; RS-232, RS-485)
  • Internal battery 550 mAh (optional); Charging control
  • ABS casing: 89x63x30 [mm]
  • Memory archive – minimum of 24.000 events (up to 48.000)
  • Signaling operation diodes of GSM and GPS
  • Full support of 1-Wire DALLAS protocol (6 thermometers, DALLAS / RFID identification)
  • Alarm, which informs that the GPS antenna is dissconnected – real-time monitoring
  • Operating a dedicated Albatross Wi-Fi module which enables a communication between GPRS-S8 terminal and a communicator / tablet using Wi-Fi networks
  • Full support for Mobileye technology
  • Full solutions support MIDAS MOVON
  • Authoring solution of protecting inputs of the device (power; ignition switch; analog inputs) – these inputs are damage resistant (e.g surge in vehicle installation)
  • Incremental firmware – backward compatible always contains all the device functions , which ensures ease of managing software versions; Files to update are delivered directly to a partner in order to further updates by using the FTP server
  • Optional support of 3D sensor in order to detect accident; tows; car cullets
  • ImmoDALLAS – an additional security for customers vehicle. The device activates the output in case of detecting the absence of authorization (DALLAS, RFID); The device allows you to save up to 256 identification numbers of drivers!
  • Ignition signal detection using a dedicated analog input, the main power supply voltage or from CAN bus
  • Ability to implement a dedicated logic functions; commands and a help of handling modules on partners demand in case of further cooperation


  • Vehicle Real-time Tracking
  • Vehicle Data Warehouse
  • Vehicle Security / Rescue / Anti-hijack
  • Mobile Asset Tracking
  • Fleet Management
  • Location Based Service

Inputs / Outputs

  • 2 reacting to mass inputs
  • 2 open collector outputs
  • 3 analog inputs (for ignition voltage measurement; fuel probes)
  • 1-Wire Input (identification of drivers; temperature measurement; DALLAS, RFID)
  • RS-232-TTL communication port (default)
  • RS-232 communication port (optional)
  • RS-485 communication port (optional)
  • Counting input
  • CAN J1939 / J1708 / J1587 / FMS / OBDII / TACHO

Server connection

EU (
US (
Server port47699
Auto registrationYes

General information

Weight110 g (3.88 oz.)

Location information

GNSS signal levelYes


Remote outputs controlYes
Hardware keyYes


Discrete inputs5
Number of outputs2
Analog sensorYes
Activate a device on the platform Try it now
Haven’t found your device? We can add it Integrate
Video Telematics NEW
Video Telematics NEW
Review incidents
Determine liability
Coach drivers
Learn more >

This website uses cookies.
See our Privacy Policy to learn more.