The Meitrack MVT100 is a fancy vehicle tracker that can be used in cars, motorcycles, yachts, and boats. The product is easy to install, water resistant (IP66), dustproof, and has built-in antennas.
Meitrack MVT100 it is a rather portable GPS tracker for vehicles. It is distinguished by its very special design and orientation for motorcycles and small boats. This device has the built-in magnets for easy installation to the vehicle.
MVT100 is a waterproof and dustproof model with a wide range of tracking options.
The package includes:
- MVT100 with a battery,
- I/O cable, and SOS button
- 3M sticker
- USB cable
Location and tracking
Meitrack MVT100 model is embedded with GPS chip. It doesn’t support Assisted GPS (A-GPS) technology. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).
Meitrack MVT100 has a Quad-band GSM module that allows to use it all over the world.
MVT100 uses built-in rechargeable backup battery of 850 mAh capacity. When fully charged it ensures about 4 hours of device operation (in normal conditions).
Note: When you use the MVT100 for the first time, connect the MVT100 GND (-Black) and Power (+Red) wires to 12 V or 24 V external power supply for charging. Ensure that the MVT100 is charged at least three hours. Eight hours are recommended. The MVT100 can be installed on a vehicle only after it is configured and tested
Local and remote management
Meitrack devices support management via GPRS. Also, there is a wide list of SMS commands, on which device always replies back. In particular, Server address and port, APN settings can be applied remotely with SMS.
MVT100 has two LEDs:
- Green LED indicates GSM mode
- Blue LED indicates GPS reception
Conexión del servidor
|Servidor de la UE||tracker.navixy.com (22.214.171.124)|
|Servidor de USA||tracker.us.navixy.com (126.96.36.199)|
|Puerto de servidor||47752|
|Nivel de señal||Sí|
|ID del operador||Sí|
Información de ubicación
|Nivel de señal GNSS||Sí|
|Localización forzada de GNSS preferente a SMS||Sí|
|Control remoto de las salidas||Sí|
|Número de salidas||1|