GoSafe G797

GoSafe Systems G797GLONASS is a portable vehicle GPS tracker that can be installed in OBDII port. This device designed for a fleet management and personal cars. It can read and transmit on-board PC data. The main feature of the device is the support of 2G and 3G networks. It also has a high-sensitive GPS receiver, built-in accelerometer and low power consumption system. The device is also equipped by device removal alert for securing the stability of its own work.

Mostrar más

Package contents

The G797 device is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation.

The standard package contains:

  • G797 device
  • USB cable

Optional accessories:

  • OBDII power supply adapter

Location and tracking

G797 model is embedded with GPS chip with the support of GLONASS technology as well. It also supports Assisted GPS (A-GPS) technology. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).

The tracking mode is flexible configured: by moving every 100m, and every 60 sec, and on turning on 30 degrees by default. When there is no movement, tracker sends data every 180 seconds.

OBDII data reading

G797 supports reading of OBDII data from vehicle’s diagnostic system such as speed, engine RPM, coolant temperature, MIL, DTC codes, etc. It takes power supply from OBDII port and also can read board voltage.

Mobile networks

G797 has a Quad-band GSM 2G module so it can be operated all over the world. Also it supports much faster and stable 3G connection

Power supply

G797 uses OBD II Connector Type A and voltage range 10-16V, which makes possible to install it on cars. Device also features a built-in rechargeable backup battery. When fully charged it ensures about 1 hour of device operation (in normal conditions).

Local and remote management

GoSafe G797 tracker can be controlled over GPRS and it supports firmware updating via GPRS (FOTA). Also, there is a wide list of SMS commands, on which device always replies back. In particular, Server address and port, APN settings can be applied remotely with SMS.

You can also configure G797 from a PC using proprietary software and standard USB-cable which is included into package.

LED Indication

G797 has three LEDs:

  • Green GSM LED: indicates GSM/GPRS mode
  • Yellow GPS LED: indicates GPS reception
  • Red Power LED: indicates power status

Integración de Servidor

Servidor de la (
Servidor de la (
Puerto de servidor47771

Información general

InstalaciónDIY (HUM)
Factor de forma especialOBDII Dongle


Peso80 g (2.82 oz.)
Tamaño52X57X28 mm (2.05x2.24x1.1 in)

Localización GNSS

Antena interna (GNSS)
GPS asistido


Tipo de la red del celularGSM Quad Band
Antena interna (Conexión)
Generación de red celular3G, 2G


Entrada ACC/ignisión

Características de hardware

Capacidad de batería250 mAh
Batería integrada
El botón de pánicoNo

Hardware extras

Escuchar la voz
On request

Características de rastreo

Modos de rastreoContinuo
Localización por Cell ID

Monitoreo de eventos

Poca batería
Corte de alimentación externa
Dispositivo on/off


Nivel de señal
Nivel de señal GNSS
Satélites GNSS fijados
Voltaje de alimentación externa
Nivel de batería interna


Tipo de lector CAN/OBDII
Parámetros CAN/OBDIIFuel level, fuel consumption, engine RPM, throttle position, speed, engine load, coolant temperature, DTC error codes and other
Lectura de códigos DTC

Administración remota

La conexión con servidor por SMS
Configuración remota de dispositivoSí (por GPRS), Sí
Actualización de firmware OTA


Active un dispositivo en la plataforma Probar
¿No ha encontrado su dispositivo? Podemos añadirlo Integrar

Este sitio usa cookies.
Revise nuestra Política de Privacidad para saber más.

Do you want to switch to English version?

Yes No