MP90 is a plug-and-play 4G OBD tracker without wiring. Easy install to any vehicle with a standard OBD II connector. It can be used locate, track and monitor the vehicle via SMS, PC Computer or Mobile APP. It is commonly used to track and locate individual vehicles, the user also can real time tracking and check the historical route travelled.
- 4G FDD LTE network support (also support 3G/2G network);
- OBD II connector easy to install (Plug and Play);
- Remove and disconnect alarm;
- Backup battery low power alarm.
Location and tracking
MP-90 tracking is based on GPS signals only. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).
Each model (MP90-A, MP90-E or MP90-AU) supports it’s own number of 4G frequencies, and, for example, MP90-E model cannot be operated in NA or SA.
Device working current is 12-24V. Tracker will be damaged if the current is
over this range. MP90 also features a built-in backup battery. When fully charged it ensures about 0.5 hours of device operation (in normal conditions) and about 2 hours in power saving mode.
GPS tracker MicTrack MP90 can be fully controlled over GPRS, including configuration of tracking modes. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.
MP90 has LED indication for System and GPS status.
|EU platform||tracker.navixy.com (22.214.171.124)|
|US platform||tracker.us.navixy.com (126.96.36.199)|
|Weight||80 g (2.82 oz.)|
|Size||60x50x25 mm (2.36x1.97x0.98 in)|
|Internal antenna (GNSS)||Yes|
|Cellular network type||GSM Quad Band|
|Internal antenna (Connection)||Yes|
|Cellular network generation||2G|
|Number of inputs (all types)||1|
|Location by Cell ID||Yes|
|External power cut off||Yes|
|Network signal level||Yes|
|GNSS signal level||Yes|
|Server connection setup over SMS||Yes|
|Remote device configuration||Yes (over SMS), Yes|
|Forced GNSS location update over SMS||Yes|