menu

Ruptela FM-Tco3

Ruptela FM-Tco3 is a Terminal with GPS / GSM connectivity, which is able to determine the object’s coordinates and transfer them via the GSM network. It is important to mention that FM-Tco3 has additional inputs and outputs, which let control and monitor other remote objects, 1-Wire® interface and CAN-bus interface integrated (for trucks FMS interface data acquisition).

Show more

This terminal is perfectly suitable for applications where location acquirement of remote objects is needed.

It also has 2 simplified RS232 ports for connecting additional equipments such as Personal Navigation Device, digital fuel level sensor or other (special firmware is needed for this).

Package contents

Ruptela FM-Tco3 device is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation. The package contains:

  • The FM-Tco3 device.
  • 10 PIN plug with wires for power supply and I/O connection
  • Magnetic GPS antenna with sticker.
  • 12 pin plug with wires for CAN-bus, 1-Wire, simplified RS232 and K_line connection.

Additional accessories

There are a few standard accessories available for Ruptela FM-Tco3 that is not included in the package:

  • Analog Temperature sensor;
  • 1-Wire Digital Temperature Sensor DS18B20 / DS18S20;
  • I-Button.

Special features

  • Any element event triggers (external sensor, input, speed, temperature, etc.);
  • Smart profile switching (GSM operator or any element depended);
  • Highly configurable data acquisition and sending (incl. data from tachograph*);
  • Real-time process monitoring;
  • Authorized number list for remote access;
  • Firmware update via GPRS or Mini USB port;
  • Configuration update via GPRS, SMS or Mini USB port;
  • TCP/IP or UDP/IP protocol support;
  • 5 000 record storing.

* Data from tachograph: vehicle’s VIN and registration numbers, driver’s identification number, driver’s state (Rest/Work/Drive/Available), driver card status (inserted/removed), total distance, trip distance, speed, RPM.

Power supply

Ruptela FM-Tco3 model supports 12/24V power supply which makes it possible to install the device both on cars and vans.

LED Indication

Ruptela FM-Tco3 device has two LEDs:

  • GPS LED
  • GSM LED

Server Integration

EU platformtracker.navixy.com (52.57.1.136)
US platformtracker.us.navixy.com (13.52.37.2)
Server port47747
Integrated on14/09/2011

General information

PurposeVehicle, Asset
InstallationProfessional

Housing

Weight110 g (3.88 oz.)
Size111x75x25 mm (4.37x2.95x0.98 in)

GNSS Location

Internal antenna (GNSS)Yes
GPSYes

Connectivity

Cellular network typeGSM Quad Band
Internal antenna (Connection)Yes
Cellular network generation2G

Interfaces

Number of RS232 interfaces2
Number of inputs (all types)5
Discrete inputsYes
Supported
Analog inputsYes
Supported
RS232 interfaceYes
1-Wire interfaceYes

Hardware features

Battery capacity800 mAh
Built-in batteryYes

Hardware extras

Driver ID readingYes
Supported

Events monitoring

Input changeYes
Supported

Self monitoring

Network signal levelYes
Supported
GNSS signal levelYes
Supported
GNSS satellites fixedYes
Supported
External power source voltageYes
Supported
Internal battery levelYes
Supported

CAN/OBDII reading

CAN/OBDII reader typeYes
Supported
CAN/OBDII parametersFuel level, fuel consumption, engine RPM, throttle position and other

Remote management

Server connection setup over SMSYes
Supported
Remote outputs controlYes (over SMS), Yes

Certification

CEYes
Activate a device on the platform Try it now
Haven’t found your device? We can add it Integrate
Tracking 3.0 NEW
Open
Tracking 3.0 NEW
Thousands of objects.
Intuitive UX.
Powerful design.
Learn more >
Open

This website uses cookies.
See our Privacy Policy to learn more.