The G6S is a new generation vehicle or asset tracking and telemetry device designed for maximum autonomy and ease of use. It is intended for use to protect and trace items such as containers, caravans, fixed plant, construction equipment, in shore boats and truck trailers. It can also be used for temporary tracking of vehicles for consignment purposes as well as covert “slap and track” operations.
Location and tracking
GoSafe G6S model is embedded with GPS chip. It doesn’t support Assisted GPS (A-GPS) technology. It uses Cell ID location (also known as LBS-tracking) as the back-up, when no satellites signals are available.
With a Quad-band GSM module G6S can operate all over the world where 2G networks are supported.
Key features of the GoSafe G6S device are:
- 3 outputs, 4 inputs and one ignition line.
- RS232 support
- Upgrading Firmware Over The Air (FOTA)
- Double GPRS servers
- 1-WIRE connectivity
External power supply range might be 8V – 36V, which makes possible to install device both on cars and vans.
GoSafe G6S also features an optional rechargeable 250 mAh backup battery. When fully charged it ensures about 3-4 hours of device uptime (in normal conditions).
Local and remote management
GPS tracker GoSafe G6S can be fully controlled over GPRS, including configuration of tracking modes and outputs control. There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.
In case ‘firmware’ of the device has an (some) error(s) or needs to be upgraded to provide the user with newly implemented services, the device can upgrade its internal ROM file over the air (Firmware OTA), using GPRS. The users do not need to visit the vehicle individually to download the new firmware on those vehicles.
G6S has three LEDs
- LED indicating GPS reception
- LED indicating GSM/GPRS reception
- LED indicating Power status
The manufacturer offers original accessories, such as:
- GPS Antenna
- MIC Cable
- GPS Antenna
- 20 Meters Water Proof Temperature Sensor
- 1 Meter Water Proof Temperature Sensor
- Data Cable
- Fastening Tape
- SOS Button Cable
- RS 232 Connection Cable
|EU platform||tracker.navixy.com (220.127.116.11)|
|US platform||tracker.us.navixy.com (18.104.22.168)|
|Weight||80 g (2.82 oz.)|
|Size||80x52x26 mm (3.15x2.05x1.02 in)|
|External antenna (GNSS)||Yes|
|Cellular network type||GSM Quad Band|
|Internal antenna (Connection)||Yes|
|Cellular network generation||2G|
|Number of outputs||3|
|Number of inputs (all types)||4|
|Battery capacity||250 mAh|
|Fuel level sensor reading||No|
|Driver ID reading||Yes|
|External temperature sensor reading||Yes|
|Location by Cell ID||Yes|
|Network signal level||Yes|
|GNSS signal level||Yes|
|External power source voltage||Yes|
|Internal battery level||Yes|
|Server connection setup over SMS||Yes|
|Remote device configuration||Yes (over GPRS), Yes|
|Remote outputs control||Yes (over SMS), Yes|
|Firmware update OTA||Yes|
|Forced GNSS location update over SMS||Yes|