Bluetooth sensors

Configure external Bluetooth sensors on a GPS device in Navixy by MAC address and type, so the platform interprets their values correctly.

Configures external Bluetooth sensors connected to certain device models. These sensors transmit raw data, often just a MAC address and a value, so you map each one here and the Navixy platform interprets it correctly. This block pairs with the platform-side Sensors and buttons block: saving here creates the corresponding sensors there.

How to configure Bluetooth sensors

1

Open the block

In Devices and settings, select the device, then expand the Bluetooth sensors block.

2

Enter the MAC address

Enter the unique MAC address (the hardware identifier printed on the sensor's label) of the Bluetooth sensor so the platform associates it with the correct device.

3

Select the sensor type

Choose the sensor type:

• Temperature and humidity sensor

• Tire pressure and temperature sensor

• Panic button

• Hardware key

• Door sensor

• Relay

4

Save

Save the configuration. The platform creates the corresponding sensors in the Sensors and buttons block.

Availability

Appears on device models that support external Bluetooth sensors.

Limitations

• Bluetooth sensors often need configuration on the device side too. Channel numbering can differ between the device's configurator and Navixy.

See also

• Vehicle sensors: the platform-side sensors this block feeds.