Predefined event identifiers

Navixy Generic Protocol includes pre-defined event identifiers (event_id) for the most common cases and alerts. Use these standard IDs whenever possible, reserving custom IDs (starting from 10,000) for unmatched events.

Power

The range for power alerts is 1 – 100.

Event id	Description
1	Low battery
2	Power lost or external power cut
3	Power On button pressed
4	Power recovered or external power connected
5	OBD Unplug from the car’s connector
6	OBD Plug in
7	Device’s backup battery low
8	Device wakes up from a sleep mode
9	Sleep mode start
10	Timer wakeup
11	Motion wakeup
12	External power wakeup
13	Power Off button pressed
14	Device power Off
15	Device power On

Security

The range for security alerts is 101 – 200.

Identifier	Description
101	Unauthorized movement event determined by the device (tow detection)
102	Unauthorized movement end
103	Device detached from the tracked object
104	Car alarm
105	Device’s case closed
106	Device’s case opened
107	Unplug from the tracked object
108	Attach device to the tracked object
109	Door alarm
110	Device’s lock closed
111	Device’s lock opened
112	Vibration end
113	Vibration start
114	Strap bolt Inserted
115	Strap bolt cut
116	GPS jamming
117	GSM signal jamming alarm
118	Bracelet open
119	Bracelet closed
120	G sensor alert
121	GPS jamming end

Safety

The range for safety alerts is 201 – 300.

Identifier	Description
201	Emergency contact number called
202	SOS button pressed event
203	Cruise control switched on
204	Cruise control switched off
205	DMS. Driver not identified
206	DMS. Driver identified
207	ADAS. Frequent lane change
208	DMS. Device can't detect human face
209	Seat belt unbuckled
210	DMS. Driver is drinking
211	DMS. Driver eyes are closed
212	DMS. Report new driver detection
213	DMS. Driver enters cabin
214	DMS. Start driver absence
215	DMS. Driver stopped smoking (Driver distraction)
216	DMS. Driver started smoking (Driver distraction)
217	DMS. Driver finished using the phone (Driver distraction)
218	DMS. Driver started using the phone (Driver distraction)
219	DMS. Yawning detected (Fatigue driving)
220	DMS. Driver stopped distraction (Driver distraction)
221	DMS. Driver started distraction (Driver distraction)
222	DMS. Driver stop drowsiness (Fatigue driving)
223	DMS. Driver start drowsiness (Fatigue driving)
224	Over speeding
225	Unexpected movement start
226	Unexpected movement end
227	ADAS. Peds in danger zone
228	ADAS. Traffic sign recognition
229	ADAS. Peds collision warning
230	Fatigue driving
231	ADAS. Headway warning
232	ADAS. Right lane departure
233	ADAS. Left lane departure
234	ADAS. Lane departure
235	ADAS. Forward collision warning
236	Harsh driving quick lane change
237	Harsh driving acceleration and turn
238	Harsh driving braking and turn
239	Harsh driving turn
240	Harsh driving acceleration
241	Harsh driving braking
242	Crash alarm
243	Harsh driving
244	Call button pressed
245	Driver distraction: texting while driving
246	Driver distraction: not watching the road (“lizard eye”)
247	Lane drift detected
248	Traffic STOP sign violation
249	Speed limit exceeded
250	Traffic light violation
251	Tailgating: unsafe following distance

Vehicle efficiency

The range for vehicle efficiency alerts is 301 – 400.

Identifier	Description
301	Idle end
302	Idle start
303	Check engine light

Track information

The range for track information alerts is 401 – 500.

Identifier	Description
401	Track. No specific event, just a track point
402	GSM LBS point report
403	Track point by time
404	Track point by distance
405	Track point by angle
406	Track movement start
407	Track movement end
408	Non-track message
409	Tracker entered auto geofence
410	Tracker exited auto geofence

Inputs

The range for inputs is 501 – 550.

Identifier	Description
501	Input 1 state changed
502	Input 2 state changed
503	Input 3 state changed
504	Input 4 state changed
505	Input 5 state changed
506	Input 6 state changed
507	Input 7 state changed
508	Input 8 state changed

Outputs

The range for outputs is 551 – 600.

Identifier	Description
551	Output 1 state changed
552	Output 2 state changed
553	Output 3 state changed
554	Output 4 state changed
555	Output 5 state changed
556	Output 6 state changed
557	Output 7 state changed
558	Output 8 state changed

Peripherals and other

The range for inputs and outputs alerts is 601 – 700.

Identifier	Description

Identifier	Description
601	Antenna disconnected
602	Accessory disconnected
603	Accessory connected
604	Ignition Off
605	Ignition On
606	Light sensor determined dark
607	Light Sensor determined bright
608	GPS signal recovered
609	GPS signal lost