Contact us Login LIVE DEMO FREE TRIAL

Xirgo

GPS tracking devices from Xirgo are quite common for American market. Today the company focuses mainly on two fast-growing applications: OBDII "plug-and-play" GPS trackers and power-efficient devices for asset tracking.

To meet the requirements of American standards Xirgo devices have passed CDMA and 3G / PTCRB and AT&T certification.

Xirgo is a California-based company with the team of developers in Minneapolis.

Official website: http://www.xirgotech.com/

Looking for other Xirgo model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47716
General information
PurposeVehicle
InstallationNot required
Special form factorOBDII Dongle
Housing
Weight55 g (1.94 oz.)
Size45.7x38.1x25.4 mm (1.8x1.5x1 in)
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Six Band
Internal antenna (Connection)
Cellular network generation2G, 3G
Interfaces
ACC/Ignition input
Feature already supported
Hardware features
Battery capacity250 mAh
Built-in batteryOptional
Tracking features
Tracking modesContinuous
Odometer
Feature already supported
ECO driving
Feature already supported
Events monitoring
External power cut off
Feature already supported
Self monitoring
Network signal level
Feature can be supported upon request
GNSS signal level
Feature already supported
External power source voltage
Feature already supported
Internal battery level
Feature can be supported upon request
CAN/OBDII reading
CAN/OBDII parametersFuel level, fuel consumption, engine RPM, throttle position, speed, engine load, coolant temperature, DTC error codes and other
Check engine light
Feature already supported
DTC codes reading
Feature already supported
Remote management
Remote device configurationYes (over SMS)
Feature already supported
Firmware update OTA
Forced GNSS location update over SMS
Feature can be supported upon request
Certification
FCC

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

+XT:1002,{apn_user},{apn_pass},{apn}
+XT:1001,47716,{server_ip},1
+XT:3001,1,1,1,1,0
+XT:3003,10
+XT:3007,6,6
+XT:3009,0,1,1
+XT:3010,180,0
+XT:3013,3,15
+XT:3014,1,5,3,0,0

The <APN> parameters depend on your GSM carrier.

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Login

[clean-login]

CLOSE
Register

[clean-login-register]

CLOSE
Loading...