TopFlyTech T8806 device is designed for vehicle tracking, including fleet management applications. This model features analog inputs for fuel detection and a two-way audio
Appearance and package content
T8806 is compact and easy-to-install tracker without external antennas. Unlike T8803 PRO, this model T8806 is not waterproof.
The package contents:
- GPS tracker
- One digital input and two analog inputs extension line (170 cm)
- Sponge double-side adhesive tape
- Power supply extension line (170 cm)
Also as an option, manufacturer offers:
- Engine block relay
- Microphone and SOS line
- Speaker extension line
Location and tracking
T8806 is embedded with GPS and doesn’t have support of GLONASS and alternative systems. It neither supports Assisted GPS technology. As the back-up, when no satellites signals are available, it uses Cell ID location (also known as LBS-tracking).
T8806 model supports such tracking models as time/interval tracking.
Also you need to connect Ignition/ACC wire, otherwise, the location service will not provide coordinates correctly.
With Quad-band GSM 2G module T8806 can be operated all over the world.
External power supply might be 6-36V, which makes it possible to install T8806 both on cars and vans.
T8806 also features a built-in rechargeable backup battery. When fully charged it ensures about 3-4 hours of device operation (in normal conditions).
TopFlyTech T8806 tracker is fully controlled over GPRS/IP channel, including tracking mode settings and outputs control.
There is also a wide list of SMS commands in a human-friendly format, on which device always replies back. It supports remote APN settings configuration by SMS.
T8806 has two LEDs:
- Red LED indicates GSM/GPRS mode
- Blue LED indicates GPS reception
The LEDs light goes out automatically in five minutes after the device is switched on.
|EU platform||tracker.navixy.com (22.214.171.124)|
|US platform||tracker.us.navixy.com (126.96.36.199)|
|Weight||68 g (2.4 oz.)|
|Network signal level||Yes|
|Network operator ID||Yes|
|GNSS signal level||Yes|
|Remote outputs control||Yes|
|Number of outputs||1|