GPS trackers from Teltonika are valued for high quality of the hardware, stable firmware, the ability to meet common use cases and apply custom specific configurations.

Teltonika is an international GPS hardware and software manufacturer with more than 19 years of experience in creating devices for the Internet of Things. This Lithuanian-Finnish company offers a wide product range: autonomous GPS trackers, fleet management devices and video monitoring units. The EMS company was founded in 1998 and has the headquarters in Lithuania. Apart from the stable hardware and firmware, the company is valued for its custom specific configurations.

Official website:

Looking for other Teltonika model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47776
Integrated on09/07/2012
General information
PurposeAsset, Personal, Pet
InstallationNot required
Weight80 g (2.82 oz.)
Size92x44x18 mm (3.62x1.73x0.71 in)
GNSS Location
Internal antenna (GNSS)
External antenna (GNSS)
Cellular network typeGSM 900/1800
Internal antenna (Connection)
Cellular network generation2G
Discrete inputs
Hardware features
Battery capacity1050 mAh
Built-in battery
Tracking features
Tracking modesContinuous, Interval
Location by Cell ID
Feature already supported
Smart power consumption
Feature already supported
ECO driving
Feature already supported
Events monitoring
Battery low
Feature already supported
Input change
Feature already supported
External power cut off
Feature already supported
Self monitoring
Network signal level
Feature already supported
GNSS signal level
Feature already supported
GNSS satellites fixed
Feature already supported
External power source voltage
Feature already supported
Internal battery level
Feature already supported
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over SMS)
Remote outputs controlYes (over GPRS)
Firmware update OTA

How to connect to Navixy server

Automatic activation

The software platform supports automatic device activation by sending SMS commands, which includes all parameters in one command, applying APN settings, server address and port, as well as recommended tracking mode. 

Before the activation process please make sure that your device is switched ON and is located in the place with good GPS signal reception. You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep them clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If you experience issues with the SMS delivery from the platform to device in your country, you can setup device manually by using Teltonika Configurator software.

Periodical and alarm data can be collected and stored in the memory or to be sent to server using GPRS. GPRS connection can be configured: Device configuration → Tracking and Saving→ GPRS.

Server information must be entered in order to send data using GPRS. These parameters can be configured: Device configuration → Connections and data → Server.



After given time device connects to server using GPRS and sends its unique IMEI code. Server confirms device log-in. Right after that device sends data in packets and after every packet server sends confirmation if data is received correctly.


USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in