Contact us Login LIVE DEMO FREE TRIAL

Teltonika

GPS tracker from Teltonika are valued for high quality of the hardware, stable firmware, also the ability to meet common use cases and apply custom specific configurations.

The range of models is quite wide and currently consists of devices for fleet management (FM series), asset tracking (AT series), as well as handheld trackers (GH series).

All devices are assembled in Vilnius, Lithuania. Established in 1998, the company has become one of the world's largest GPS tracker manufacturers.

Official website: http://www.teltonika.lt/

Looking for other Teltonika model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47776
General information
PurposeVehicle
InstallationProfessional
Housing
Size65x56,6x18,9 mm (2.56x2.2x0.24x0.71x0.35 in)
GNSS Location
Internal antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of outputs2
Number of inputs (all types)3
ACC/Ignition input
Feature already supported
Discrete inputs
Feature already supported
Analog inputs
Feature already supported
Hardware features
Internal temperature sensor
Feature already supported
Hardware extras
Driver ID reading
Feature already supported
External temperature sensor reading
Feature already supported
Tracking features
Tracking modesContinuous
Location by Cell ID
Feature already supported
Odometer
Feature already supported
ECO driving
Feature already supported
Events monitoring
External power cut off
Feature already supported
Self monitoring
Network signal level
Feature already supported
GNSS signal level
Feature already supported
External power source voltage
Feature already supported
Internal battery level
Feature already supported
CAN/OBDII reading
CAN/OBDII parametersSpeed, Fuel level, Engine RPM, Engine load, Throttle position
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over GPRS)
Feature already supported
Remote outputs controlYes (over SMS)
Feature already supported
Forced GNSS location update over SMS
Feature can be supported upon request

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device via SMS:

setparam 2001:{apn};
setparam 2002:{apn_user};
setparam 2003:{apn_pass};
setparam 2004:{server_hostname};
setparam 2000:1;
setparam 2005:47776;
setparam 2006:0;
setparam 10005:180;
setparam 10205:180;
setparam 10055:60;
setparam 10255:60

The <APN> parameters depend on your GSM carrier.

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Login

[clean-login]

CLOSE
Register

[clean-login-register]

CLOSE
Loading...