Contact us Login LIVE DEMO FREE TRIAL

Teltonika

GPS tracker from Teltonika are valued for high quality of the hardware, stable firmware, also the ability to meet common use cases and apply custom specific configurations.

The range of models is quite wide and currently consists of devices for fleet management (FM series), asset tracking (AT series), as well as handheld trackers (GH series).

All devices are assembled in Vilnius, Lithuania. Established in 1998, the company has become one of the world's largest GPS tracker manufacturers.

Official website: http://www.teltonika.lt/

Looking for other Teltonika model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47776
Integrated on06/02/2015
Revised on10/06/2015
General information
PurposeVehicle
InstallationProfessional
Housing
Weight80 g (2.82 oz.)
Size65x56.6x18.9 mm (2.56x2.23x0.74 in)
GNSS Location
Internal antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
1-Wire interface
Number of outputs2
Number of inputs (all types)3
Discrete inputs
Feature already supported
Analog inputs
Feature already supported
Outputs
Hardware features
Battery capacity170 mAh
Built-in battery
Hardware extras
Driver ID reading
Feature already supported
Tracking features
Tracking modesContinuous, Interval
Location by Cell ID
Feature already supported
Smart power consumption
Feature already supported
ECO driving
Feature already supported
Events monitoring
Battery low
Feature already supported
Input change
Feature already supported
External power cut off
Feature can be supported upon request
Self monitoring
Network signal level
Feature already supported
GNSS signal level
Feature already supported
GNSS satellites fixed
Feature already supported
External power source voltage
Feature already supported
Internal battery level
Feature already supported
CAN/OBDII reading
CAN/OBDII reader type
Feature can be supported upon request
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over SMS)
Remote outputs controlYes (over SMS)
Firmware update OTA
Certification
CE
FCC

How to connect to Navixy server

Automatic activation

The software platform supports automatic device activation by sending SMS commands, which includes all parameters.

Before the activation process please make sure that your device is switched ON and is located in the place with good GPS signal reception. You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep them clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If you experience issues with the SMS delivery from the platform to device in your country, you can setup device manually by using following SMS commands:

setparam 1242 {apn}
setparam 1583 1
setparam 1240 1
setparam 1580 180
setparam 1595 7F,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF
setparam 1594 5
setparam 1593 1
setparam 1590 60
setparam 1247 0
setparam 201 1
setparam 1246 47776
setparam 1245 tracker.navixy.com
setparam 1244 {apn_pass}
setparam 1585 7F,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF
setparam 1243 {apn_user}
setparam 1584 5

Important: All commands should be sent with 2 <space> symbols before the command.

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Login

[clean-login]

CLOSE
Register

[clean-login-register]

CLOSE
Loading...