Contact us Login VIEW DEMO FREE TRIAL

Teltonika

GPS tracker from Teltonika are valued for high quality of the hardware, stable firmware, also the ability to meet common use cases and apply custom specific configurations.

The range of models is quite wide and currently consists of devices for fleet management (FM series), asset tracking (AT series), as well as handheld trackers (GH series).

All devices are assembled in Vilnius, Lithuania. Established in 1998, the company has become one of the world's largest GPS tracker manufacturers.

Official website: http://www.teltonika.lt/

Looking for other Teltonika model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47776
Integrated on24/11/2011
Revised on29/01/2015
General information
PurposeVehicle
InstallationProfessional
Housing
Weight80 g (2.82 oz.)
Size66.5x49.7 mm (2.62x1.96 in)
Waterproof classIP6X
GNSS Location
Internal antenna (GNSS)
External antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
External antenna (Connection)
Cellular network generation2G
Interfaces
1-Wire interface
Number of outputs2
Number of inputs (all types)4
Discrete inputs
Feature already supported
Analog inputs
Feature already supported
Outputs
Hardware features
Battery capacity170 mAh
Built-in battery
Emergency button
Hardware extras
Driver ID reading
Feature already supported
External temperature sensor reading
Feature already supported
Tracking features
Tracking modesContinuous, Interval
Location by Cell ID
Feature already supported
Smart power consumption
Feature already supported
ECO driving
Feature already supported
Events monitoring
Battery low
Feature already supported
Input change
Feature already supported
External power cut off
Feature already supported
Self monitoring
Network signal level
Feature already supported
GNSS signal level
Feature already supported
GNSS satellites fixed
Feature already supported
External power source voltage
Feature already supported
Internal battery level
Feature already supported
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over SMS)
Remote outputs controlYes (over SMS), Over GPRS (Requires firmware 09.XX.XX)
Feature already supported
Firmware update OTA
Certification
CE
FCC

How to connect to Navixy server

Teltonika FM1204 is tightly integrated with this software platform.

Automatic activation

The software platform supports automatic device activation by sending SMS commands, which includes all parameters in one command, applying APN settings, server address and port, as well as recommended tracking mode. These SMS commands can be sent in two formats:

  • Binary format (recommended) – one SMS to configure multiple parameters
  • Text ASCII format – one SMS to configure one parameter only

Binary format is recommended because it requires less messages to send from  platform to device. When using binary format it is just 2-3 SMS to send, and in text format it’s more than 20 messages in total. However, depending on the SMS gateway and GSM operator binary SMS can not be delivered, and it requires to use Text messages.

Before the activation process please make sure that your device is switched ON and is located in the place with good GPS signal reception. You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep them clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If you experience issues with the SMS delivery from the platform to device in your country, you can setup device manually by using Teltonika Configurator software.

Setup with Teltonika configuration software

First step you should make is to install Teltonika FM1204 drivers.  Please make sure that your PC meets the following requirements:

and then download Virtual COM Port drivers from Teltonika website http://avl1.teltonika.lt/downloads/FM11/vcpdriver_v1.3.1_setup.zip

1. Install drivers:
  1. Extract and run VCPDriver_V1.3.1_Setup.exe. This driver is used to detect FM1122 device connected to the computer.
  2. Click ‘Next’ in driver installation window.
  3. Setup will continue installing drivers and will display a window about successful process at the end.
  4. Click ‘Finish’ to complete setup
Teltonika drivers installation
Teltonika drivers installation
2. Update the software:

Connect FM1204 to PC with the USB cable. Launch “Firmware Updater”, select COM port to which device is connected, click connect, and when IMEI and Firmware version fields are filled, start the update.

Teltonika firmware updater

Device needs some time to send IMEI and Firmware version, so do not be afraid if IMEI will not show up immediately, disconnect and after 1-2 minutes try to connect again. Update process may take up to several minutes.

Teltonika firmware update process

Please note that in the latest firmware Teltonika added support of LV-CAN, so to use it you will have to upgrade

3. Run the Teltonika Configurator software

Configuration process starts from starting FM1204 Configurator program and then connecting to FM1204 device via Connect button located on the top left corner of configurator.

If connected successfully IMEI, Version fields which were empty, now are filled with certain numbers depending on Modem IMEI and firmware version of your device.

FM1204 has 2 configuration modes: Recommended Configuration and Advanced Configuration. Recommended Configuration mode uses predefined data acquisition values. In this configuration mode it is only required to enter network parameters.

Teltonika Configurator software 2

In Advanced Configuration mode FM1204 is more configurable. FM1204 Configurator is divided into main areas: 1 – main button area, 2 – information area, 3 –settings menu, 4 – parameters and values menu, 5 – information about connection. Button 6 is used to change between configuration modes.

Teltonika Configurator software

Main Buttons description:
  • ‘Connect’ – connects device
  • ‘Load’ – reads configuration parameters from FM1204 Flash memory.
  • ‘Save’ – saves configuration parameters to FM1204 Flash memory.
  • ‘Load Defaults’ – loads default FM1204 settings that later can be modified. This procedure must be performed before entering new parameters.
  • ‘Save to File…’ – allows user to save currently entered settings to .XML file, for later usage.
  • ‘Load from File…’ – allows user to load configuration saved in .XML extension file.
  • ‘Reset device’ – reboots FM1204 and displays processor firmware version.
Additional Buttons description:
  • ‘SIM PIN’ – allows to enter PIN code if inserted SIM card has activated PIN code security.

Note that PIN code can be entered 2 times.

  • ‘Add Keyword’ / ‘Change Keyword’ / ‘Switch Security Off’– buttons are used to protect configurator from unauthorized access to configuration.

Keyword is 4 – 10 symbol length. If keyword is set, every time user reconnects FM1204 to USB port, user will be asked to provide valid keyword when connecting FM1204 to configurator.

User is given 5 attempts to enter keyword. After entering valid keyword, counter resets to 5.

If user disconnects FM1204 using ‘Disconnect’ button and does not disconnect from USB port, after reconnecting using ‘Connect’ button, configurator does not ask for keyword.

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Login

[clean-login]

CLOSE
Register

[clean-login-register]

CLOSE
Loading...