Contact us Login LIVE DEMO FREE TRIAL

CAREU UT1

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port46986
General information
PurposeVehicle
InstallationProfessional
Housing
Weight622 g (21.94 oz.)
Size145x105x65 mm (5.71x4.13x2.56 in)
Waterproof classIP67
GNSS Location
GPSYes
GLONASSOptional
GalileoOptional
BeidouOptional
Assisted GPSYes
Connectivity
Cellular network typeGSM 850/900/1800/1900
Cellular network generation2G, 3G
Interfaces
1-Wire interfaceYes
RS232 interfaceOptional
Number of outputs2
Number of inputs (all types)4
ACC/Ignition inputYes
Supported
Discrete inputsYes
Supported
Analog inputsYes
Supported
Hardware features
Battery capacity5200 mAh
Built-in batteryYes
Tracking features
Tracking modesContinuous, Interval
OdometerYes
Supported
ECO drivingYes
Supported
Events monitoring
Battery lowYes
Supported
External power cut offYes
Supported
Car crashYes
Supported
Device switched on/offYes
Supported
Self monitoring
GNSS signal levelYes
Supported
External power source voltageYes
On request
Internal battery levelYes
On request
CAN/OBDII reading
CAN/OBDII reader typeExternal
Supported
Remote management
Server connection setup over SMSYes
Supported
Remote device configurationYes (over GPRS)
Supported
Remote outputs controlYes

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending SMS/GPRS commands to the device.

SMS commands:

AT$MODID=1234567890
AT$APN={apn},{apn_user},{apn_pass}
AT$HOSTS=1,0,{server_ip},46986
AT$SAVE

The <APN> parameters depend on your GSM carrier.

GPRS commands:

AT$IPTYPE=1
AT$FORMAT=1
AT$PDSR=28,300,100,10,3
AT$GPRSEN=1,1
AT$HB=290,0
AT$PACKAGE=1,0
AT$POWEREN=1,1,3
AT$RFIDC=2
AT$IBDETEN=1,3
AT$LPRC=15,3
AT$IMPEN=1,3
AT$IDLEEN=1,3
AT$TOWEN=1,3
AT$PWRM=12,0,0,40,12,0,2,12
AT$SAVE

Activate a device on the platform Try it now

Haven’t found your device? We can add it Integrate

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 317 1622

Log in

Loading...

We use сookies to improve our website, products and related services, analyze site traffic, and serve targeted advertisements. If you continue to use our services, you consent to our use of сookies. Read more