Contact us Login LIVE DEMO FREE TRIAL

Suntech ST600R

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47728
General information
PurposeVehicle
InstallationDIY
Housing
Weight100 g (3.53 oz.)
Size90x58x26 mm (3.54x2.28x1.02 in)
GNSS Location
Internal antenna (GNSS)Yes
GPSYes
GLONASSYes
Connectivity
Cellular network typeGSM Quad Band, UTMS 850/1900/2100
Internal antenna (Connection)Yes
Cellular network generation2G, 3G
Interfaces
RS232 interfaceYes
Number of RS232 interfaces1
Number of outputs2
Number of inputs (all types)5
ACC/Ignition inputYes
Supported
Discrete inputsYes
Supported
Hardware features
Emergency buttonOptional
Supported
Hardware extras
Fuel level sensor readingYes
On request
Voice listeningYes
On request
Tracking features
Tracking modesContinuous
Location by Cell IDYes
Supported
OdometerYes
Supported
ECO drivingYes
Supported
Events monitoring
Battery lowYes
Supported
External power cut offYes
Supported
Car crashYes
Supported
TowingYes
Supported
Self monitoring
Network signal levelYes
Supported
GNSS signal levelYes
Supported
External power source voltageYes
Supported
Internal battery levelYes
Supported
Remote management
Server connection setup over SMSYes
Supported
Remote device configurationYes (over GPRS)
Supported
Remote outputs controlYes
Forced LBS location update over GPRSYes
On request
Forced GNSS location update over SMSYes
On request

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

ST600NTW;1234567890;02;0;{apn};{apn_user};{apn_pass};217.23.132.215;47728;;;;

The <APN> parameters depend on your GSM carrier.

Activate a device on the platform Try it now

Haven’t found your device? We can add it Integrate

More about Suntech in our blog

  • Integrated devices. March, 2016

    We are happy to announce the final of the integration process for a few GPS trackers. During the last month our developing team added 10 new devices to the Navixy database. We integrated some Teltonika, Concox, Castel, AMGPS, Suntech, GalileoSky and Keson devices…

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Loading...

We use сookies to improve our website, products and related services, analyze site traffic, and serve targeted advertisements. If you continue to use our services, you consent to our use of сookies. Read more