Suntech positions their devices as the most customizable and high-quality GPS tracking devices in the world. This ambitious statement looks like an advance, thus Suntech GPS trackers are really popular not only in Korea.


More from Suntech

Click on the model image to see detailed information and current list of supported features

Looking for other Suntech model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47728
Integrated on19/03/2015
Revised on19/03/2015
General information
Weight100 g (3.53 oz.)
Size90.5x58x26 mm (3.56x2.28x1.02 in)
GNSS Location
Internal antenna (GNSS)
External antenna (GNSS)
Cellular network typeGSM Quad Band
Internal antenna (Connection)
External antenna (Connection)
Cellular network generation2G
1-Wire interface
RS232 interface
Number of outputs2
Number of inputs (all types)12
ACC/Ignition input
Feature already supported
Discrete inputs
Feature already supported
Analog inputs
Feature already supported
Feature already supported
Hardware features
Battery capacity450 mAh
Built-in batteryOptional
Emergency button
Feature already supported
Hardware extras
Fuel level sensor reading
Feature already supported
Emergency button
Feature already supported
Driver ID reading
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Location by Cell ID
Feature already supported
Smart power consumption
Feature already supported
Events monitoring
Battery low
Feature already supported
Device switched on/off
Feature already supported
Self monitoring
Network signal level
Feature already supported
GNSS signal level
Feature already supported
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over GPRS)
Feature already supported
Firmware update OTA

How to connect to Navixy server

IMPORTANT: When activate the device in the system for the first time, you’ll be asked to enter the Device ID. You can get the device ID from the IMEI number: it consists of the s last 8 digits, except the very last one, with no dashes. Example: ******-00-453234-*

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:


<Device_ID> – 9 digits, your device id. Can be found on the device itself. (*****1-00-453234-* – the example how to find device ID in the IMEI)

<APN_Name> – your local GSM-provider APN

<User>,<Password> – your local GSM-provider user and password for APN

More about Suntech in our blog


USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in