Starcom Helios Hybrid
Helios Hybrid is a tracking device for remote and isolated areas. It works anywhere and anytime due to a combination of satellite communications "Iridium" and mobile communications. The Helios Hybrid has all the features of Helios Advanced, as well as a hybrid connection, which allows you to connect even outside the cellular communication range.
Show more
Location and tracking
- GPS, GLONASS Support
- Interval tracking mode
Mobile networks
- Quad-band GSM 850,900,1800,1900
- 2G / 3G Network
Power supply
- Optional built-in LiPo 950 mAh battery
Inputs and outputs
- 8 Digital inputs
- 4 Digital outputs
- 3 Analog inputs
- 1 Impulse input
Other features
- Optional battery
- Operating temperature -40 .. +60 C
- 2 Mb flash memory
- CANBUS
Server Integration
| EU platform | tracker.navixy.com (52.57.1.136) | |
| US platform | tracker.us.navixy.com (13.52.37.2) | |
| Server port | 47705 |
General information
| Purpose | Vehicle | |
| Installation | Professional |
Housing
| Weight | 150 g (5.29 oz.) | |
| Size | 107x60x21 mm (4.21x2.36x0.83 in) |
GNSS Location
| Internal antenna (GNSS) | Yes | |
| GPS | Yes | |
| GLONASS | Optional |
Connectivity
| Cellular network type | GSM 850/900/1800/1900 | |
| Cellular network generation | 3G, 2G |
Interfaces
| Number of outputs | 5 | |
| Number of inputs (all types) | 12 | |
| ACC/Ignition input | Yes | Supported |
| Discrete inputs | Yes | Supported |
| Analog inputs | Yes | Supported |
| Impulse inputs | Yes | Supported |
| RS232 interface | Yes |
Hardware extras
| Fuel level sensor reading | Yes | Supported |
| Driver ID reading | Yes | On request |
Tracking features
| Tracking modes | Interval | |
| Odometer | Yes | Supported |
| ECO driving | Yes | Supported |
Events monitoring
| External power cut off | Yes | Supported |
| Car crash | Yes | Supported |
Self monitoring
| GNSS signal level | Yes | Supported |
| External power source voltage | Yes | Supported |
| Internal battery level | Yes | Supported |
CAN/OBDII reading
| CAN/OBDII parameters | Engine RPM |
Remote management
| Remote device configuration | Yes (over GPRS) | Supported |
| Remote outputs control | Yes (over GPRS) | Supported |
Activate a device on the platform Try it now
Haven’t found your device? We can add it Integrate