Contact us Login LIVE DEMO FREE TRIAL

SkyPatrol TT8750+

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47708
General information
PurposeVehicle
InstallationProfessional
Housing
Weight130 g (4.59 oz.)
Size65x61x26 mm (2.56x2.4x1.02 in)
GNSS Location
External antenna (GNSS)Yes
GPSYes
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)Yes
Cellular network generation2G
Interfaces
Number of outputs5
Number of inputs (all types)9
ACC/Ignition inputYes
Supported
Discrete inputsYes
Supported
Analog inputsYes
Supported
OutputsYes
Supported
Hardware features
Battery capacity250 mAh
Built-in batteryYes
Emergency button
Hardware extras
Fuel level sensor reading
Driver ID reading
Fuel temperature sensor reading
Tracking features
Tracking modesContinuous
Location by Cell IDYes
Supported
Smart power consumptionYes
Supported
OdometerYes
Supported
Self monitoring
Network signal levelYes
Supported
GNSS signal levelYes
Supported
External power source voltageYes
Supported
Internal battery levelYes
Supported
Remote management
Server connection setup over SMSYes
Supported
Remote device configurationYes (over GPRS)
Supported
Remote outputs controlYes (over GPRS)
Supported
Forced LBS location update over GPRS
Forced GNSS location update over SMS
Certification
CEYes
EACYes

How to connect to Navixy server

Automatic activation

The software platform supports automatic device activation by sending SMS commands, which includes all parameters in one command, applying APN settings, server address and port, as well as recommended tracking mode.

Before the activation process please make sure that your device is switched ON and is located in the place with good GPS signal reception. You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep them clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If you experience issues with the SMS delivery from the platform to device in your country, you can setup device manually with these SMS commands:

AT+CGDCONT=1,”IP”,”<apn>”
AT$CGPCO=1,”<apnUser>,<apnPass>”,0
AT$TTARG=2
AT$TTSRVDST=1,1,”<217.23.132.215>”,47708,2
AT$TTMSGMASK=1,225181695
AT$TTWAKEUP=1,1
AT&W
AT$RESET

Please note, that <apn>,<apnUser> and <apnPass> are APN parameters of your local GSM carrier.

Activate a device on the platform Try it now

Haven’t found your device? We can add it Integrate

More about SkyPatrol in our blog

  • SkyPatrol TT8750/8750+ integrated

    SkyPatrol GPS devices attain good fame, especially in the North America region, due to quality components and firmware, as well as high functionality.…

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 317 1622

Log in

Loading...

We use сookies to improve our website, products and related services, analyze site traffic, and serve targeted advertisements. If you continue to use our services, you consent to our use of сookies. Read more