More from Sanfone

Click on the model image to see detailed information and current list of supported features

Looking for other Sanfone model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server IP Address217.23.132.215
Server port46983
General information
PurposeAsset, Vehicle
InstallationNot required
Weight120 g (4.23 oz.)
Size132x64x28 mm (5.2x2.52x1.1 in)
GNSS Location
Internal antenna (GNSS)
Cellular network typeGSM 850/900/1800/1900
Internal antenna (Connection)
Cellular network generation2G
1-Wire interface
Number of outputs2
Number of inputs (all types)2
ACC/Ignition input
Feature already supported
Discrete inputs
Feature already supported
Hardware features
Emergency button
Feature already supported
Hardware extras
Driver ID reading
Feature already supported
External temperature sensor reading
Feature already supported
Tracking features
Tracking modesContinuous
Location by Cell ID
Feature already supported
Feature already supported
ECO driving
Feature already supported
Events monitoring
Battery low
Feature already supported
External power cut off
Feature already supported
Car crash
Feature already supported
Self monitoring
GNSS signal level
Feature already supported
Internal battery level
Feature already supported
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over GPRS)
Feature already supported
Remote outputs controlYes (over GPRS)
Feature already supported
Forced LBS location update over GPRS
Feature can be supported upon request
Forced GNSS location update over SMS
Feature can be supported upon request

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:


The <APN> parameters depend on your GSM carrier.


USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in