Contact us Login VIEW DEMO FREE TRIAL

Queclink

Queclink GPS trackers often set the standards of quality for other manufacturers, that's why its product line is highly esteemed worldwide. All Queclink models are appreciated for hardware quality and stable firmware with lots of configuration parameters.

Headquartered in Shanghai, Queclink has assembly lines in China, that meet the highest standards of quality assurance. For closer support of the regional markets, the company has subsidiaries, particularly, in Mexico and Shenzhen.

Official website: http://queclink.com/

Looking for other Queclink model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47764
Housing
Weight100 g (3.53 oz.)
Size102x46x20.5 mm (4.02x1.81x0.81 in)
Interfaces
1-Wire interface
Number of RS232 interfaces1
Feature can be supported upon request
Number of outputs2
Number of inputs (all types)4
ACC/Ignition input
Feature already supported
Discrete inputs
Feature already supported
Outputs
Feature already supported
Hardware extras
Driver ID reading
Feature can be supported upon request
External temperature sensor reading
Feature already supported
Tracking features
Tracking modesContinuous, Interval
Location by Cell ID
Feature already supported
Odometer
Feature already supported
ECO driving
Feature already supported
Events monitoring
Battery low
Feature already supported
External power cut off
Feature already supported
Self monitoring
Network signal level
Feature already supported
GNSS signal level
Feature already supported
External power source voltage
Feature already supported
Internal battery level
Feature already supported
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over GPRS)
Feature already supported
Forced LBS location update over GPRS
Feature already supported
Forced GNSS location update over SMS
Feature already supported

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

AT+GTQSS=gv75,{apn},{apn_user},{apn_pass},3,,2,{server_hostname},47764,,,+922 222 22,10,0,0,,0001$

The <APN> parameters depend on your GSM carrier. You will also need to specify the phone number of your sim-card.

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Login

[clean-login]

CLOSE
Register

[clean-login-register]

CLOSE
Loading...