Contact us Login LIVE DEMO FREE TRIAL

Queclink GV55VC

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47764
Integrated on28/11/2012
Revised on19/02/2015
General information
PurposeVehicle
InstallationDIY
Housing
Weight44 g (1.55 oz.)
Size63x50x13.2 mm (2.48x1.97x0.52 in)
GNSS Location
Internal antenna (GNSS)Yes
GPSYes
GLONASSYes
GalileoYes
BeidouYes
Assisted GPSYes
Chipsetu-blox
Connectivity
Cellular network typeCDMA2000 800/1900
Internal antenna (Connection)Yes
Cellular network generation3G
Interfaces
Number of outputs2
Number of inputs (all types)2
ACC/Ignition inputYes
Supported
Discrete inputsYes
Supported
OutputsYes
Supported
Hardware features
Non-volatile memoryYes
Supported
AccelerometerYes
Tracking features
Tracking modesContinuous
Location by Cell IDYes
Supported
Smart power consumptionYes
Supported
OdometerYes
Supported
ECO drivingYes
Supported
Events monitoring
Battery lowYes
Supported
Input changeYes
Supported
External power cut offYes
Supported
Self monitoring
Network signal levelYes
Supported
GNSS signal levelYes
Supported
GNSS satellites fixedYes
Supported
External power source voltageYes
Supported
Internal battery levelYes
Supported
Remote management
Server connection setup over SMSYes
Supported
Remote device configurationYes (over GPRS)
Supported
Remote outputs controlYes (over GPRS)
Device ID typeStatic (IMEI)
Message exchange formatASCII
Firmware update OTAYes
Forced LBS location update over GPRSYes
Supported
Forced GNSS location update over SMSYes
Supported
Certification
CEYes
FCCYes
EACYes

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

AT+GTBSI=gv55vc,{apn},{apn_user},{apn_pass},,,,,0001$
AT+GTSRI=gv55vc,3,,2,{server_hostname},47764,,,+922 222 22,10,0,0,,,,0002$

The <APN> parameters depend on your GSM carrier.

Activate a device on the platform Try it now

Haven’t found your device? We can add it Integrate

More about Queclink in our blog

  • Up-to-date Queclink GV500 – OBD2 tracker with awesome characteristics

    Trusted friend of all the drivers who keeps a sharp lookout for their vehicles was on vacation. Now it is back even smarter and better.…

  • Queclink GV500: Best OBDII tracker so far?

    Every manufacturer of GPS units has its own bestseller. It is true for Queclink GV500 GPS tracker, multipurpose OBDII device, with a high-quality hardware inside. We continue our reviews of plug-and-play devices with this OBDII tracker, and, leaping ahead, set a standard of reliability for such type of GPS units.…

  • Integration update: 130+ devices supported by Navixy

    Despite a summer jam the list of Navixy supported devices keeps growing on a daily basis. This time our developers have successfully integrated a full range of new models from Naviset, Redview, Meiligao, Meitrack, Moralwinkh, Gubloos, Zixia and Queclink.…

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Loading...

We use сookies to improve our website, products and related services, analyze site traffic, and serve targeted advertisements. If you continue to use our services, you consent to our use of сookies. Read more