Queclink GPS trackers often set the standards of quality for other manufacturers, that’s why its product line is highly esteemed worldwide. All Queclink models are appreciated for hardware quality and stable firmware with lots of configuration parameters.

Queclink Wireless Solutions is a prominent M2M devices supplier and ready-made solutions provider. Founded in 2009 and headquartered in Shanghai, Queclink has assembly lines in China and some subsidiaries in Mexico and Shenzhen. It has already reached the top ten hardware manufacturers place on the M2M market offering a stable firmware and hardware quality with a considerable set of configuration parameters.

Official website:

Looking for other Queclink model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47764
Integrated on06/09/2013
Revised on19/02/2015
General information
InstallationNot required
Weight42 g (1.48 oz.)
Size48x25x48 mm (1.89x0.98x1.89 in)
GNSS Location
Internal antenna (GNSS)
Assisted GPS
Cellular network typeCDMA2000 800/1900
Internal antenna (Connection)
Cellular network generation3G
Hardware features
Battery capacity130 mAh
Built-in battery
Hardware extras
Fuel level sensor reading
Feature already supported
Tracking features
Location by Cell ID
Feature already supported
Smart power consumption
Feature already supported
Feature already supported
ECO driving
Feature already supported
Events monitoring
External power cut off
Feature already supported
Car crash
Feature already supported
Feature already supported
Self monitoring
Network signal level
Feature already supported
GNSS signal level
Feature already supported
GNSS satellites fixed
Feature already supported
Internal battery level
Feature already supported
CAN/OBDII reading
CAN/OBDII reader typeInternal, Yes
Feature already supported
CAN/OBDII parametersFuel level, fuel consumption, engine RPM, throttle position, speed, engine load, coolant temperature, DTC error codes and other, Yes
Feature already supported
DTC codes reading
Feature already supported
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over GPRS)
Feature already supported
Forced LBS location update over GPRS
Feature already supported
Forced GNSS location update over SMS
Feature already supported

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

AT+GTQSS=gv500vc,{apn},{apn_user},{apn_pass},3,,2,{server_hostname},47764,,,+922 222 22,10,0,,,0001$

The <APN> parameters depend on your GSM carrier.


USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in