Contact us Login LIVE DEMO FREE TRIAL

Queclink GV320

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47764
General information
PurposeVehicle
InstallationProfessional
Housing
Size80x49x26 mm (3.15x1.93x1.02 in)
GNSS Location
Internal antenna (GNSS)Yes
GPSYes
Connectivity
Cellular network typeDual-Band GSM
Internal antenna (Connection)Yes
Cellular network generation2G
Interfaces
RS232 interfaceYes
Number of RS232 interfaces1
Number of outputs3
Number of inputs (all types)5
ACC/Ignition inputYes
Supported
Discrete inputsYes
Supported
Analog inputsYes
Hardware extras
Fuel level sensor readingYes
Supported
Driver ID readingYes
Supported
External temperature sensor readingYes
Tracking features
Tracking modesContinuous, Interval
Location by Cell IDYes
Supported
OdometerYes
Supported
ECO drivingYes
Supported
Events monitoring
Battery lowYes
Supported
External power cut offYes
Supported
SIM card slot openYes
Supported
Self monitoring
Network signal levelYes
Supported
GNSS signal levelYes
Supported
External power source voltageYes
Supported
Internal battery levelYes
Supported
Remote management
Server connection setup over SMSYes
Supported
Remote device configurationYes (over GPRS)
Supported
Remote outputs controlYes (over GPRS)
Supported
Forced LBS location update over GPRSYes
Supported
Forced GNSS location update over SMSYes
Supported

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following commands to the device:

AT+GTQSS=gv320,{apn},{apn_user},{apn_pass},3,,2,{server_hostname},47764,,,,10,0,,,0001$

The {APN} parameters depend on your GSM carrier.

Activate a device on the platform Try it now

Haven’t found your device? We can add it Integrate

More about Queclink in our blog

  • Up-to-date Queclink GV500 – OBD2 tracker with awesome characteristics

    Trusted friend of all the drivers who keeps a sharp lookout for their vehicles was on vacation. Now it is back even smarter and better.…

  • Queclink GV500: Best OBDII tracker so far?

    Every manufacturer of GPS units has its own bestseller. It is true for Queclink GV500 GPS tracker, multipurpose OBDII device, with a high-quality hardware inside. We continue our reviews of plug-and-play devices with this OBDII tracker, and, leaping ahead, set a standard of reliability for such type of GPS units.…

  • Integration update: 130+ devices supported by Navixy

    Despite a summer jam the list of Navixy supported devices keeps growing on a daily basis. This time our developers have successfully integrated a full range of new models from Naviset, Redview, Meiligao, Meitrack, Moralwinkh, Gubloos, Zixia and Queclink.…

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 317 1622

Log in

Loading...

We use сookies to improve our website, products and related services, analyze site traffic, and serve targeted advertisements. If you continue to use our services, you consent to our use of сookies. Read more