Contact us Login LIVE DEMO FREE TRIAL

Queclink

Queclink GPS trackers often set the standards of quality for other manufacturers, that’s why its product line is highly esteemed worldwide. All Queclink models are appreciated for hardware quality and stable firmware with lots of configuration parameters.

Queclink Wireless Solutions is a prominent M2M devices supplier and ready-made solutions provider. Founded in 2009 and headquartered in Shanghai, Queclink has assembly lines in China and some subsidiaries in Mexico and Shenzhen. It has already reached the top ten hardware manufacturers place on the M2M market offering a stable firmware and hardware quality with a considerable set of configuration parameters.

Official website: http://queclink.com/

Looking for other Queclink model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47764
General information
PurposeVehicle
InstallationProfessional
Housing
Weight75 g (2.65 oz.)
Size91.5x51.5x11 mm (3.6x2.03x0.43 in)
GNSS Location
Internal antenna (GNSS)
GPS
GLONASS
Assisted GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation2G
Interfaces
Number of inputs (all types)1
ACC/Ignition input
Feature already supported
Discrete inputs
Feature already supported
Hardware features
Battery capacity200 mAh
Built-in battery
Tracking features
Tracking modesContinuous
Location by Cell ID
Feature already supported
Odometer
Feature already supported
ECO driving
Feature already supported
Events monitoring
Battery low
Feature already supported
External power cut off
Feature already supported
Car crash
Feature already supported
Self monitoring
Network signal level
Feature already supported
GNSS signal level
Feature already supported
External power source voltage
Feature already supported
Internal battery level
Feature already supported
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over GPRS)
Feature already supported
Forced LBS location update over GPRS
Feature already supported
Forced GNSS location update over SMS
Feature already supported

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • AT+GTQSS=gb100,{apn},{apn_user},{apn_pass},3,,2,tracker.navixy.com,47764,,,,10,0,,,0001$

<APN> – your local GSM-provider APN

<User>,<Password> – your local GSM-provider user and password for APN

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Login

[clean-login]

CLOSE
Register

[clean-login-register]

CLOSE
Loading...