Contact us Login LIVE DEMO FREE TRIAL

Portman GT3101

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47741
General information
PurposeVehicle
InstallationProfessional
Housing
Weight50 g (1.76 oz.)
Size90x52x15 mm (3.54x2.05x0.59 in)
GNSS Location
Internal antenna (GNSS)Yes
GPSYes
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)Yes
Cellular network generation2G
Interfaces
Number of outputs7
Number of inputs (all types)2
ACC/Ignition inputYes
Supported
Discrete inputsYes
Supported
OutputsYes
Supported
Hardware features
Battery capacity300 mAh
Built-in batteryYes
Hardware extras
Fuel level sensor readingYes
Supported
Driver ID readingYes
On request
Tracking features
Tracking modesContinuous, Interval
OdometerYes
Supported
Events monitoring
Battery lowYes
Supported
Self monitoring
Network signal levelYes
Supported
GNSS signal levelYes
Supported
External power source voltageYes
Supported
CAN/OBDII reading
CAN/OBDII reader typeExternal
Supported
Remote management
Server connection setup over SMSYes
Supported
Remote device configurationYes (over GPRS)
Supported
Remote outputs controlYes (over GPRS)
Supported
Forced GNSS location update over SMSYes
On request
Certification
CEYes
FCCYes

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • &&1234567890,Z10,{apn},{apn_user},{apn_pass}
  • &&1234567890,Z39,1,217.23.132.215,47741,1

<APN> – your local GSM-provider APN

<User>,<Password> – your local GSM-provider user and password for APN

Activate a device on the platform Try it now

Haven’t found your device? We can add it Integrate

More about Portman in our blog

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Loading...

We use сookies to improve our website, products and related services, analyze site traffic, and serve targeted advertisements. If you continue to use our services, you consent to our use of сookies. Read more