The AR-2GM Tracker is a real-time vehicle tracking system designed for vehicle recovery, fleet management and more.
The ultra-thin yet extremely durable AR-2GM is a high performance cellular tracking device designed for vehicle tracking, lot management, theft recovery, or other fleet applications. With an integrated GPS receiver, the AR-2GM includes a GPRS modem for wireless data communication and global coverage. The built in high performance antennas for both cellular radio and GPS receivers make installation easy.
No programming skills required: The AR-2GM comes with easy-to-configure application software. Reports can be triggered periodically or in response to events such as motion, speeding, geo-fence violations, heading changes, towing, battery removal, and more.
The AR-2GM’s interfaces include a serial port for communication with terminals and devices, power, ground, four GPIO pins that can be used for dedicated ignition, relay, and I/O. Optional features include an internal Lithium-Ion back up battery (BuB) that allows for continuous operation and recovery.
Location and tracking
- 56 channels GPS chip (no GLONASS support)
- Continuous tracking mode
- No LBS support
- Standard quad-band 850/900/1800/1900 MHz
- Only 2G networks
- Build-in 80 mAh battery
Inputs and outputs
- 8-pin I/O connector
- UART (RX/TX)
- 4 GPIOs or dedicated I/Os, for Ignition, Relay, UART
|EU platform||tracker.navixy.com (18.104.22.168)|
|US platform||tracker.us.navixy.com (22.214.171.124)|
|Size||91x39x15 mm (3.58x1.54x0.59 in)|
|Internal antenna (GNSS)||Yes|
|Cellular network type||GSM Quad Band|
|Internal antenna (Connection)||Yes|
|Cellular network generation||2G|
|Number of inputs (all types)||4|
|External power cut off||Yes|
|Network signal level||Yes|
|GNSS signal level||Yes|
|External power source voltage||Yes|
|Internal battery level||Yes|
|Server connection setup over SMS||Yes|
|Remote device configuration||Yes (over GPRS)|
|Forced GNSS location update over SMS||Yes|