Contact us Login LIVE DEMO FREE TRIAL

Navtelecom Signal S-2552

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47709
General information
PurposeVehicle
InstallationProfessional
Housing
Weight100 g (3.53 oz.)
Size105x78x20,5 mm (4.13x3.07x0.79x0.2 in)
Waterproof classIP5X
GNSS Location
External antenna (GNSS)Yes
GPSYes
GLONASSYes
Connectivity
Cellular network typeGSM Quad Band
External antenna (Connection)Yes
Cellular network generation3G
Interfaces
1-Wire interfaceYes
RS232 interfaceYes
Number of RS232 interfaces1
RS485 interfaceYes
Number of outputs4
Number of inputs (all types)6
ACC/Ignition inputYes
Supported
Discrete inputsYes
Supported
Analog inputsYes
Supported
Impulse inputsYes
On request
Frequency inputsYes
On request
OutputsYes
Supported
Hardware features
Battery capacity1200 mAh
Built-in batteryYes
Hardware extras
Fuel level sensor readingYes
Supported
Voice listeningYes
On request
Driver ID readingYes
On request
External temperature sensor readingYes
Supported
CameraYes
On request
Tracking features
Tracking modesContinuous
Location by Cell IDYes
Supported
OdometerYes
Supported
Events monitoring
Battery lowYes
Supported
External power cut offYes
Supported
Mobile signal jammingYes
Supported
Self monitoring
Network signal levelYes
Supported
GNSS signal levelYes
Supported
External power source voltageYes
Supported
Internal battery levelYes
Supported
CAN/OBDII reading
CAN/OBDII reader typeYes
Supported
CAN/OBDII parametersFuel level, fuel consumption, engine RPM, throttle position, speed, coolant temperature and other
Remote management
Server connection setup over SMSYes
Supported
Remote outputs controlYes (over SMS)
Supported
Forced GNSS location update over SMSYes
On request
Certification
CEYes
FCCYes

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

SET1 217.23.132.215 47709
SET2 <apn> <apn_user> <apn_password> FLEX

The <APN> parameters depend on your GSM carrier.

Activate a device on the platform Try it now

Haven’t found your device? We can add it Integrate

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Loading...

We use сookies to improve our website, products and related services, analyze site traffic, and serve targeted advertisements. If you continue to use our services, you consent to our use of сookies. Read more