Contact us Login VIEW DEMO FREE TRIAL

Navtelecom

Navtelecom

Looking for other Navtelecom model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47709
General information
PurposeVehicle
InstallationProfessional
Housing
Weight100 g (3.53 oz.)
Size105x78x20,5 mm (4.13x3.07x0.79x0.2 in)
Waterproof classIP5X
GNSS Location
External antenna (GNSS)
GPS
GLONASS
Connectivity
Cellular network typeGSM Quad Band
External antenna (Connection)
Cellular network generation2G
Interfaces
1-Wire interface
RS232 interface
Number of RS232 interfaces1
Number of outputs4
Number of inputs (all types)6
ACC/Ignition input
Feature already supported
Discrete inputs
Feature already supported
Analog inputs
Feature already supported
Impulse inputs
Feature can be supported upon request
Frequency inputs
Feature can be supported upon request
Outputs
Feature already supported
Hardware features
Battery capacity1200 mAh
Built-in battery
Hardware extras
Fuel level sensor reading
Feature already supported
Driver ID reading
Feature can be supported upon request
External temperature sensor reading
Feature already supported
Tracking features
Tracking modesContinuous
Location by Cell ID
Feature already supported
Odometer
Feature already supported
Events monitoring
Battery low
Feature already supported
External power cut off
Feature already supported
Mobile signal jamming
Feature already supported
Self monitoring
Network signal level
Feature already supported
GNSS signal level
Feature already supported
External power source voltage
Feature already supported
Internal battery level
Feature already supported
CAN/OBDII reading
CAN/OBDII reader type
Feature already supported
CAN/OBDII parametersFuel level, fuel consumption, engine RPM, throttle position, speed, coolant temperature and other
Remote management
Server connection setup over SMS
Feature already supported
Remote outputs controlYes (over SMS)
Feature already supported
Forced GNSS location update over SMS
Feature can be supported upon request
Certification
CE
FCC

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual activation

In case automatic activation failed, you can try to register the device manually by sending following command to the device:

SET1 217.23.132.215 47709
SET2 <apn> <apn_user> <apn_password> FLEX

The <APN> parameters depend on your GSM carrier.

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Login

[clean-login]

CLOSE
Register

[clean-login-register]

CLOSE
Loading...