Navtelecom Smart S-2332
Navtelecom SMART S-2332 is a GPS/GLONASS monitoring unit, which has RS-232, RS-485 and 1-wire input. The device is able to read CAN-data with the help of CAN-LOG or CANTEC adapters. S-2332 has a built-in battery and a microphone.
Package contents include:
- 14-pin cable (harness) type Microfit-14
- Interface cable with a MiniUSB connector
- CD with software and documentation
- User manual
Location and tracking
Navtelecom SMART S-2332 model is embedded with GPS and has the support of GLONASS system. As a backup it uses Cell-ID or LBS services to get the location of the unit.
With Quad-band GSM 2G module Navtelecom SMART S-2332 can be operated all over the world.
External power supply might be 8.5 – 48V, with an over-voltage protection, which makes possible to install S-2332 both on cars and vans.
S-2332 also features built-in rechargeable backup battery. When fully charged it ensures about 4-6 hours of device operation (in normal conditions).
Local and remote management
Navtelecom SMART S-2332 can not be controlled over GPRS, the configuration should be made by using special software “NTC Configurator”.
Navtelecom SMART S-2332 has following features:
- Real Time Tracking
- Fuel level reading
- Remote outputs control
- The support of FLEX-protocol for traffic economy
- CAN-data reading
- RS-485 sensor
- RS-232 sensor
- EGTS Protocol support
- Internal battery
|EU platform||tracker.navixy.com (188.8.131.52)|
|US platform||tracker.us.navixy.com (184.108.40.206)|
|Weight||85 g (3 oz.)|
|Network signal level||Yes|
|Network operator ID||Yes|
|GNSS signal level||Yes|
|Remote outputs control||Yes|
|Number of outputs||2|