Navtelecom Signal S-2552
Navtelecom SIGNAL S-2552 is a GPS/GLONASS monitoring unit, which has a CAN-interface with J1939 support. S-2552 has a built-in battery and also supports two SIM-cards, and microSD memory card up to 32 GB. It also supports 3G-networks.
It is the most advanced unit in the Navtelecom Signal devices line.
Package contents include:
- GPS/GLONASS Antenna
- GSM Antenna
- Fuse – 1 A
- Fuse holder
- 14-pin cable (harness) type Microfit-14
- 6-pin cable (harness) type Microfit-6
- 4-pin cable (harness) type Microfit-4
- Interface cable with a MiniUSB connector
- CD with software and documentation
Location and tracking
Navtelecom SIGNAL S-2552 model is embedded with GPS and has the support of GLONASS system. As a backup it uses Cell-ID or LBS services to get the location of the unit.
With Quad-band GSM 3G module Navtelecom SIGNAL S-2552 can be operated all over the world.
External power supply might be 8.5 – 48V, with an over-voltage protection, which makes possible to install S-2552 both on cars and vans.
S-2552 also features built-in rechargeable backup battery. When fully charged it ensures about 4-6 hours of device operation (in normal conditions).
Local and remote management
Navtelecom SIGNAL S-2552 can not be controlled over GPRS, the configuration should be made by using special software “NTC Configurator”.
- Real Time Tracking
- Fuel monitoring
- Remote outputs control
- CAN-data reading
- Two-way hands-free communication
- Two SIM-cards support
- microSD cards support
- The support of FLEX-protocol for traffic economy
- EGTS Protocol support
- Remote ddd-files extraction
- Driver display
- Internal battery
|EU platform||tracker.navixy.com (220.127.116.11)|
|US platform||tracker.us.navixy.com (18.104.22.168)|
|Weight||100 g (3.53 oz.)|
|Network signal level||Yes|
|Network operator ID||Yes|
|GNSS signal level||Yes|
|Remote outputs control||Yes|
|Number of outputs||4|