Contact us Login LIVE DEMO FREE TRIAL

Navtelecom

Navtelecom

Select GPS tracker model

Click on the model image to see detailed information and current list of supported features

Navtelecom Signal S-2550

Navtelecom SIGNAL S-2550 is a simplified version of the SIGNAL S-2551 and is designed to solve simple tasks of vehicle monitoring. The device retained the ability to read data from the CAN bus of the vehicle using CANLog, and the ability to connect pulse, analog and digital (RS-232) fuel level sensors. The device also has a built-in battery.

Package contents

Package contents include:

  • Device
  • GPS/GLONASS Antenna
  • GSM Antenna
  • Fuse - 1 A
  • Fuse holder
  • 14-pin cable (harness) type Microfit-14
  • 6-pin cable (harness) type Microfit-6
  • Interface cable with a MiniUSB connector
  • CD with software and documentation
  • Packaging

Location and tracking

Navtelecom SIGNAL S-2550 model is embedded with GPS and has the support of GLONASS system. As a backup it uses Cell-ID or LBS services to get the location of the unit.

Mobile networks

With Quad-band GSM 2G module Navtelecom SIGNAL S-2550 can be operated all over the world.

Power supply

External power supply might be 8.5 – 48V, with an over-voltage protection, which makes possible to install S-2550 both on cars and vans.

S-2550 also features optional rechargeable backup battery. When fully charged it ensures about 4-5 hours of device operation (in normal conditions).

Local and remote management

Navtelecom SIGNAL S-2550 can not be controlled over GPRS, the configuration should be made by using special software "NTC Configurator".

Features

Navtelecom SIGNAL S-2550 has following features:
  • Real Time Tracking
  • Fuel monitoring
  • Remote outputs control
  • CAN-data reading
  • EGTS Protocol support
  • Internal battery

Navtelecom Signal S-2551

Navtelecom SIGNAL S-2551 is a GPS/GLONASS monitoring unit, which has a CAN-interface with J1939 support. S-2551 has a built-in battery and also supports two SIM-cards, and microSD memory card up to 32 GB.

It is the most advanced unit in the Navtelecom Signal devices line.

Package contents

Package contents include:

  • Device
  • GPS/GLONASS Antenna
  • GSM Antenna
  • Fuse - 1 A
  • Fuse holder
  • 14-pin cable (harness) type Microfit-14
  • 6-pin cable (harness) type Microfit-6
  • 4-pin cable (harness) type Microfit-4
  • Interface cable with a MiniUSB connector
  • CD with software and documentation
  • Packaging

Location and tracking

Navtelecom SIGNAL S-2551 model is embedded with GPS and has the support of GLONASS system. As a backup it uses Cell-ID or LBS services to get the location of the unit.

Mobile networks

With Quad-band GSM 2G module Navtelecom SIGNAL S-2551 can be operated all over the world.

Power supply

External power supply might be 8.5 – 48V, with an over-voltage protection, which makes possible to install S-2551 both on cars and vans.

S-2551 also features built-in rechargeable backup battery. When fully charged it ensures about 4-6 hours of device operation (in normal conditions).

Local and remote management

Navtelecom SIGNAL S-2551 can not be controlled over GPRS, the configuration should be made by using special software "NTC Configurator".

Features

Navtelecom SIGNAL S-2551 has following features:
  • Real Time Tracking
  • Fuel monitoring
  • Remote outputs control
  • Camera
  • CAN-data reading
  • Two-way hands-free communication
  • Two SIM-cards support
  • microSD cards support
  • The support of FLEX-protocol for traffic economy
  • EGTS Protocol support
  • Remote ddd-files extraction
  • Driver display
  • LBS-location
  • Internal battery

Navtelecom Signal S-2552

Navtelecom SIGNAL S-2552 is a GPS/GLONASS monitoring unit, which has a CAN-interface with J1939 support. S-2552 has a built-in battery and also supports two SIM-cards, and microSD memory card up to 32 GB.

It is the most advanced unit in the Navtelecom Signal devices line.

Package contents

Package contents include:

  • Device
  • GPS/GLONASS Antenna
  • GSM Antenna
  • Fuse - 1 A
  • Fuse holder
  • 14-pin cable (harness) type Microfit-14
  • 6-pin cable (harness) type Microfit-6
  • 4-pin cable (harness) type Microfit-4
  • Interface cable with a MiniUSB connector
  • CD with software and documentation
  • Packaging

Location and tracking

Navtelecom SIGNAL S-2552 model is embedded with GPS and has the support of GLONASS system. As a backup it uses Cell-ID or LBS services to get the location of the unit.

Mobile networks

With Quad-band GSM 3G module Navtelecom SIGNAL S-2552 can be operated all over the world.

Power supply

External power supply might be 8.5 – 48V, with an over-voltage protection, which makes possible to install S-2552 both on cars and vans.

S-2552 also features built-in rechargeable backup battery. When fully charged it ensures about 4-6 hours of device operation (in normal conditions).

Local and remote management

Navtelecom SIGNAL S-2552 can not be controlled over GPRS, the configuration should be made by using special software "NTC Configurator".

Features

Navtelecom SIGNAL S-2552 has following features:
  • Real Time Tracking
  • Fuel monitoring
  • Remote outputs control
  • Camera
  • CAN-data reading
  • Two-way hands-free communication
  • Two SIM-cards support
  • microSD cards support
  • The support of FLEX-protocol for traffic economy
  • EGTS Protocol support
  • Remote ddd-files extraction
  • Driver display
  • LBS-location
  • Internal battery

Navtelecom Smart S-2330

Navtelecom SMART S-2330 is a simple and cost-effective GPS/GLONASS monitoring unit. It has sensitive GLONASS/GPS antennas and a built-in battery.

Package contents

Package contents include:

  • Device
  • 14-pin cable (harness) type Microfit-14
  • Interface cable with a MiniUSB connector
  • CD with software and documentation
  • Packaging

Location and tracking

Navtelecom SMART S-2330 model is embedded with GPS and has the support of GLONASS system. As a backup it uses Cell-ID or LBS services to get the location of the unit.

Mobile networks

With Quad-band GSM 2G module Navtelecom SMART S-2330 can be operated all over the world.

Power supply

External power supply might be 8.5 – 48V, with an over-voltage protection, which makes possible to install S-2330 both on cars and vans.

Local and remote management

Navtelecom SMART S-2330 can not be controlled over GPRS, the configuration should be made by using special software "NTC Configurator".

Features

Navtelecom SMART S-2330 has following features:
  • Real Time Tracking
  • Remote outputs control
  • The support of FLEX-protocol for traffic economy
  • EGTS Protocol support

Navtelecom Smart S-2331

Navtelecom SMART S-2331 is a GPS/GLONASS monitoring unit, which has RS-232 and 1-wire input. S-2331 has a built-in battery and a microphone.

Package contents

Package contents include:

  • Device
  • 14-pin cable (harness) type Microfit-14
  • Interface cable with a MiniUSB connector
  • CD with software and documentation
  • Packaging

Location and tracking

Navtelecom SMART S-2331 model is embedded with GPS and has the support of GLONASS system. As a backup it uses Cell-ID or LBS services to get the location of the unit.

Mobile networks

With Quad-band GSM 2G module Navtelecom SMART S-2331 can be operated all over the world.

Power supply

External power supply might be 8.5 – 48V, with an over-voltage protection, which makes possible to install S-2331 both on cars and vans.

S-2331 also features built-in rechargeable backup battery. When fully charged it ensures about 4-6 hours of device operation (in normal conditions).

Local and remote management

Navtelecom SMART S-2331 can not be controlled over GPRS, the configuration should be made by using special software "NTC Configurator".

Features

Navtelecom SMART S-2331 has following features:
  • Real Time Tracking
  • Remote outputs control
  • The support of FLEX-protocol for traffic economy
  • 1-wire
  • RS-232 sensor
  • EGTS Protocol support
  • Internal battery

Navtelecom Smart S-2332

Navtelecom SMART S-2332 is a GPS/GLONASS monitoring unit, which has RS-232, RS-485 and 1-wire input.

The device is able to read CAN-data with the help of CAN-LOG or CANTEC adapters. S-2332 has a built-in battery and a microphone.

Package contents

Package contents include:

  • Device
  • 14-pin cable (harness) type Microfit-14
  • Interface cable with a MiniUSB connector
  • CD with software and documentation
  • User manual
  • Packaging

Location and tracking

Navtelecom SMART S-2332 model is embedded with GPS and has the support of GLONASS system. As a backup it uses Cell-ID or LBS services to get the location of the unit.

Mobile networks

With Quad-band GSM 2G module Navtelecom SMART S-2332 can be operated all over the world.

Power supply

External power supply might be 8.5 – 48V, with an over-voltage protection, which makes possible to install S-2332 both on cars and vans.

S-2332 also features built-in rechargeable backup battery. When fully charged it ensures about 4-6 hours of device operation (in normal conditions).

Local and remote management

Navtelecom SMART S-2332 can not be controlled over GPRS, the configuration should be made by using special software "NTC Configurator".

Features

Navtelecom SMART S-2332 has following features:
  • Real Time Tracking
  • Fuel level reading
  • Remote outputs control
  • The support of FLEX-protocol for traffic economy
  • 1-wire
  • CAN-data reading
  • RS-485 sensor
  • RS-232 sensor
  • EGTS Protocol support
  • Internal battery

Navtelecom Smart S-2333

Navtelecom SMART S-2333 is a simple and cost effective GPS/GLONASS monitoring solution, which has RS-485 and 1-wire input.

Package contents

Package contents include:

  • Device
  • 14-pin cable (harness) type Microfit-14
  • Interface cable with a MiniUSB connector
  • CD with software and documentation
  • User manual
  • Packaging

Location and tracking

Navtelecom SMART S-2333 model is embedded with GPS and has the support of GLONASS system. As a backup it uses Cell-ID or LBS services to get the location of the unit.

Mobile networks

With Quad-band GSM 2G module Navtelecom SMART S-2333 can be operated all over the world.

Power supply

External power supply might be 8.5 – 48V, with an over-voltage protection, which makes possible to install S-2333 both on cars and vans.

S-2333 also features built-in rechargeable backup battery. When fully charged it ensures about 4-6 hours of device operation (in normal conditions).

Local and remote management

Navtelecom SMART S-2333 can not be controlled over GPRS, the configuration should be made by using special software "NTC Configurator".

Features

Navtelecom SMART S-2333 has following features:
  • Real Time Tracking
  • Fuel level reading
  • Remote outputs control
  • The support of FLEX-protocol for traffic economy
  • 1-wire
  • RS-485 sensor
  • EGTS Protocol support
  • Internal battery

Looking for other Navtelecom model? Suggest us to integrate it.

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Login

[clean-login]

CLOSE
Register

[clean-login-register]

CLOSE
Loading...