Meitrack GPS trackers are popular in different regions of the world by their good value: fair price vs quality ratio. They are targeted at mid-range markets and fit best for projects with higher requirements to quality and functionality.

Meitrack GPS trackers are manufactured by Meitrack Group established in 2002, headquartered in Shenzhen, China. Within past years Meitrack has become one of the global leading supplier of GPS trackers and M2M devices based on GSM technology combined with GPS, WiFi, 1-Wire, etc. The company also possess subsidiary departments in California, Kuala Lumpur, Hong Kong, and Taiwan.

Official website:

Looking for other Meitrack model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47752
General information
Weight190 g (6.7 oz.)
Size105x65x26 mm (4.13x2.56x1.02 in)
GNSS Location
Internal antenna (GNSS)
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation3G
1-Wire interface
RS232 interface
Feature already supported
Number of RS232 interfaces1
RS485 interface
Number of outputs2
Number of inputs (all types)5
ACC/Ignition input
Feature already supported
Discrete inputs
Feature already supported
Analog inputs
Feature already supported
Feature already supported
Hardware features
Battery capacity400 mAh
Built-in battery
Feature already supported
Emergency button
Feature already supported
Hardware extras
Fuel level sensor reading
Feature already supported
Emergency button
Feature already supported
Driver ID reading
Feature already supported
External temperature sensor reading
Feature already supported
Feature can be supported upon request
Tracking features
Tracking modesContinuous
Location by Cell ID
Feature already supported
Feature already supported
ECO driving
Feature already supported
Events monitoring
Battery low
Feature already supported
External power cut off
Feature already supported
Feature already supported
Self monitoring
Network signal level
Feature already supported
GNSS signal level
Feature already supported
External power source voltage
Feature already supported
Internal battery level
Feature already supported
CAN/OBDII reading
CAN/OBDII reader type
Feature can be supported upon request
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over GPRS)
Feature already supported
Remote outputs controlYes (over GPRS)
Feature already supported
Forced LBS location update over GPRS
Feature can be supported upon request
Forced GNSS location update over SMS
Feature already supported

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • <tracker password>,A21,1,,47752,<APN>,<APN username>,<APN password>
    • <tracker password> – the default password for tracker settings, usually it is 0000
    • <APN> – APN of your GSM provider
    • <APN username> – username of APN, if any
    • <APN password> – password of APN, if any


USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in