Contact us Login LIVE DEMO FREE TRIAL

Meitrack

Meitrack GPS trackers are popular in different regions of the world by their good value: fair price vs quality ratio. They are targeted at mid-range markets and fit best for projects with higher requirements to quality and functionality.

Meitrack is a GPS products and M2M devices provider. Established in 2002 and headquartered in Shenzhen, China, it has developed a rapidly growing international distribution network and subsidiary departments in California, Dubai, Hong Kong and Taiwan.

Within the last years, the company has proved to be a prominent figure in the Telematics field offering GSM technology based trackers and M2M devices combined with GPS, WiFi, 1-Wire, etc.

Official website: http://www.meitrack.com/

Looking for other Meitrack model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47752
General information
PurposeVehicle
InstallationProfessional
Housing
Weight100 g (3.53 oz.)
Size80.5x60x23.5 mm (3.17x2.36x0.93 in)
Waterproof classIP67
GNSS Location
Internal antenna (GNSS)
GPS
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)
Cellular network generation3G
Interfaces
1-Wire interface
Number of outputs1
Number of inputs (all types)3
ACC/Ignition input
Feature already supported
Discrete inputs
Feature already supported
Analog inputs
Feature already supported
Outputs
Feature already supported
Hardware features
Built-in batteryOptional
Hardware extras
Emergency button
Feature already supported
Driver ID reading
Feature already supported
External temperature sensor reading
Feature already supported
Tracking features
Tracking modesContinuous
Location by Cell ID
Feature already supported
Odometer
Feature already supported
ECO driving
Feature already supported
Events monitoring
Battery low
Feature already supported
External power cut off
Feature already supported
Towing
Feature already supported
Self monitoring
GNSS signal level
Feature already supported
External power source voltage
Feature already supported
Internal battery level
Feature already supported
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over GPRS)
Feature already supported
Remote outputs controlYes (over GPRS)
Feature already supported
Forced GNSS location update over SMS
Feature already supported

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • <tracker password>,A21,1,217.23.132.215,47752,<APN>,<APN username>,<APN password>
    • <tracker password> – the default password for tracker settings, usually it is 0000
    • <APN> – APN of your GSM provider
    • <APN username> – username of APN, if any
    • <APN password> – password of APN, if any

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Login

[clean-login]

CLOSE
Register

[clean-login-register]

CLOSE
Loading...