Contact us Login LIVE DEMO FREE TRIAL

Meitrack T333

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47752
Integrated on19/03/2015
Revised on19/03/2015
General information
PurposeVehicle
InstallationProfessional
Housing
Weight190 g (6.7 oz.)
Size105x65x26 mm (4.13x2.56x1.02 in)
GNSS Location
External antenna (GNSS)Yes
GPSYes
Assisted GPSYes
Connectivity
Cellular network typeGSM Quad Band
External antenna (Connection)Yes
Cellular network generation2G, 3G
Interfaces
RS232 interfaceYes
Number of RS232 interfaces1
Number of outputs3
Number of inputs (all types)5
Discrete inputsYes
Supported
Analog inputsYes
Supported
OutputsYes
Supported
Hardware features
Battery capacity850 mAh
Built-in batteryYes
Emergency buttonYes
Supported
Internal temperature sensorYes
Supported
Hardware extras
Fuel level sensor readingYes
Supported
Driver ID readingYes
Supported
Engine block special controlYes
Supported
External temperature sensor readingYes
Supported
Tracking features
Tracking modesContinuous
Location by Cell IDYes
Supported
Smart power consumptionYes
Supported
Events monitoring
Battery lowYes
Supported
Input changeYes
Supported
Antenna cut offYes
Supported
Device switched on/offYes
Supported
SIM card slot openYes
Supported
Self monitoring
Network signal levelYes
Supported
GNSS signal levelYes
Supported
GNSS satellites fixedYes
Supported
External power source voltageYes
Supported
Internal battery levelYes
Supported
Remote management
Server connection setup over SMSYes
Supported
Remote device configurationYes (over GPRS)
Remote outputs controlYes (over GPRS)
Forced GNSS location update over SMSYes
On request
Certification
CEYes
FCCYes
EACYes

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • @@H48,<IMEI>,0000,A21,1,217.23.132.215,47752,<APN_Name>,<User>,<Password>
    Reply example: $$H28,<IMEI>,A21,OK*F4rn

<APN_Name> – your local GSM-provider APN

<User>,<Password> – your local GSM-provider user and password for APN

<IMEI> – device IMEI

Activate a device on the platform Try it now

Haven’t found your device? We can add it Integrate

More about Meitrack in our blog

  • Meitrack T355: a king of asset GPS trackers

    Meitrack T355 a kind of GPS devices born to be successful on a market. The reason is a combination of simplicity and functionality based on special demands from asset GPS trackers. A rule of thumb states that these factors are crucial to make a real best-seller.…

  • Meitrack T355 and T333
    Integration: Meitrack T355 and T333 (3G)

    We continue to work towards providing the best user experience in GPS tracking by integrating all the latest GPS devices. Today it’s about two new models from Meitrack – T355 and T333, that puts the total amount of supported devices of this manufacturer to 10.…

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in

Loading...

We use сookies to improve our website, products and related services, analyze site traffic, and serve targeted advertisements. If you continue to use our services, you consent to our use of сookies. Read more