Meitrack GPS trackers are popular in different regions of the world by their good value: fair price vs quality ratio. They are targeted at mid-range markets and fit best for projects with higher requirements to quality and functionality.

Meitrack GPS trackers are manufactured by Meitrack Group established in 2002, headquartered in Shenzhen, China. Within past years Meitrack has become one of the global leading supplier of GPS trackers and M2M devices based on GSM technology combined with GPS, WiFi, 1-Wire, etc. The company also possess subsidiary departments in California, Kuala Lumpur, Hong Kong, and Taiwan.

Official website:

Looking for other Meitrack model? Suggest us to integrate it.

Server connection details

Supported features

Server Integration
Server IP Address217.23.132.215
Server port47752
Integrated on19/03/2015
Revised on19/03/2015
General information
Weight190 g (6.7 oz.)
Size105x65x26 mm (4.13x2.56x1.02 in)
GNSS Location
External antenna (GNSS)
Cellular network typeGSM Quad Band
External antenna (Connection)
1-Wire interface
Number of outputs5
Number of inputs (all types)7
Discrete inputs
Feature already supported
Analog inputs
Feature already supported
Feature already supported
Hardware features
Battery capacity850 mAh
Built-in battery
Events monitoring
Battery low
Feature already supported
Input change
Feature already supported
Antenna cut off
Feature already supported
Device switched on/off
Feature already supported
Self monitoring
GNSS signal level
Feature already supported
GNSS satellites fixed
Feature already supported
Internal battery level
Feature already supported
Remote management
Server connection setup over SMS
Feature already supported
Remote device configurationYes (over GPRS)
Remote outputs controlYes (over GPRS)
Forced GNSS location update over SMS
Feature can be supported upon request

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • <tracker password>,A21,1,,47752,<APN>,<APN username>,<APN password>
    • <tracker password> – the default password for tracker settings, usually it is 0000
    • <APN> – APN of your GSM provider
    • <APN username> – username of APN, if any
    • <APN password> – password of APN, if any


USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 223 0427

Log in