Contact us Login LIVE DEMO FREE TRIAL

JamTrack JM10

Supported features

Server Integration
Server Addresstracker.navixy.com
Server IP Address217.23.132.215
Server port47735
Integrated on06/02/2015
Revised on06/02/2015
General information
PurposeVehicle
InstallationProfessional
Housing
Weight120 g (4.23 oz.)
Size83x54x26 mm (3.27x2.13x1.02 in)
GNSS Location
Internal antenna (GNSS)Yes
External antenna (GNSS)Optional
GPSYes
Connectivity
Cellular network typeGSM Quad Band
Internal antenna (Connection)Yes
External antenna (Connection)Optional
Cellular network generation2G
Interfaces
Number of outputs2
Number of inputs (all types)5
ACC/Ignition inputYes
On request
Discrete inputsYes
On request
Analog inputsYes
On request
OutputsYes
Supported
Hardware features
Battery capacity800 mAh
Built-in batteryYes
Emergency buttonYes
Supported
Hardware extras
Fuel level sensor readingYes
On request
Tracking features
Tracking modesContinuous
Location by Cell IDYes
Supported
ECO drivingYes
On request
Events monitoring
Battery lowYes
On request
External power cut offYes
On request
Self monitoring
Network signal levelYes
Supported
GNSS signal levelYes
Supported
Internal battery levelYes
Supported
Remote management
Server connection setup over SMSYes
Supported
Remote device configurationYes (over SMS)
Supported
Remote outputs controlYes (over SMS)
Supported
Message exchange formatASCII
Forced GNSS location update over SMSYes
On request
Certification
CEYes
FCCYes

How to connect to Navixy server

Automatic activation (recommended)

The software platform supports automatic device activation by applying APN settings, server address and port, as well as recommended tracking mode though the SMS channel. Normally you don’t need to configure anything manually. Just install the SIM card, switch the device ON and make sure it is located in the place with good GPS signal reception.

You also need to keep the device with initial factory settings, in particular:

  • Do not set any password, keep it clear (as by default)
  • Do not set any master number prior to the device activation
  • Do not set local Time zone, it must be UTC+0h (as by default)

Manual configuration

If the automatic activation failed, you can point the device to the server manually by sending these commands to the device:

  • APN123456 <apn> <apnUser> <apnPass>
  • adminip123456 217.23.132.215 47735
  • timezone123456 0
  • ITV123456 30 30

<APN_Name> – your local GSM-provider APN

<User>,<Password> – your local GSM-provider user and password for APN

Activate a device on the platform Try it now

Haven’t found your device? We can add it Integrate

Contacts

USA: +1 858 815 9045

Mexico: +52 334 1642158

UK: +44 808 1641499

Germany: +49 1573 5988250

Russia: +7 495 317 1622

Log in

Loading...

We use сookies to improve our website, products and related services, analyze site traffic, and serve targeted advertisements. If you continue to use our services, you consent to our use of сookies. Read more